Pay It Forward Again

[jstarr]

Thanks @SlingBlader! Got the tuners!

 

[integra evan]

Historic-like pickup rings and guards from Philadelphia Luthier that I just got from @jstarr823 last week. Rings almost as tall as Gibson Historic rings (pictured next to my R9 for reference), and a non beveled guard. Free to a CONUS address.

CLAIMED

 

[Wuuthrad]

Hi would these fit a 2010 Les Paul Studio?

Ive been wanting to turn my All Ebony into a Jeff Beck lookalike or something similar. circa Blow by Blow:

View attachment 445410

 

[integra evan]

Hi would these fit a 2010 Les Paul Studio?

Ive been wanting to turn my All Ebony into a Jeff Beck lookalike or something similar. circa Blow by Blow:

View attachment 445410

They would, but they were just claimed by someone a few minutes before you posted

 

[Wuuthrad]

Ok bummer thanks though!

 

[Roxy13]

I still have at least 2 Gibson SG PCB harnesses if someone has a need.

Give me a few weeks here and I may have some pickups if someone has a project guitar and has a need.

 

[integra evan]

Ok bummer thanks though!

No problem, they are pretty inexpensive from PLT&S if you want to get a new set.

 

[SlingBlader]

Thanks @SlingBlader! Got the tuners!

Great! Enjoy!

 

[scrumm21]

Russkie EL84 is gone! I hope it brightens up your Bugera, @scrumm21 !

Just arrived this afternoon....will drop it in tonite or tomorrow !!

Thx Again

 

[SWeAT hOg]

Just arrived this afternoon....will drop it in tonite or tomorrow !!

Thx Again

Right on! I’m looking forward to hearing if it makes a difference.

 

[scrumm21]

Right on! I’m looking forward to hearing if it makes a difference.

spent an hour practicing after dropping it in ( it replaced a Tung Sol el84 & am using tung sol preamp 12ax7 currently)
It was subtle but there is a positive difference esp when using bridge pickups. More open ...me likey
It's gonna stay in for sure.
Thx Again my Canadian friend !
Mg

 

[jkes01]

spent an hour practicing after dropping it in ( it replaced a Tung Sol el84 & am using tung sol preamp 12ax7 currently)
It was subtle but there is a positive difference esp when using bridge pickups. More open ...me likey
It's gonna stay in for sure.
Thx Again my Canadian friend !
Mg

I ordered some JJ tubes and a Warehouse 8” speaker for my Bugera V5 from StewMac, they sent me Ruby tubes instead. I did notice about the same as you with it sounding a little more open. Can’t wait for the speaker to break in a bit more.

 

[SWeAT hOg]

spent an hour practicing after dropping it in ( it replaced a Tung Sol el84 & am using tung sol preamp 12ax7 currently)
It was subtle but there is a positive difference esp when using bridge pickups. More open ...me likey
It's gonna stay in for sure.
Thx Again my Canadian friend !
Mg

Scrumm, I'm very pleased it got to you and you are enjoying it. Like I said, those tubes are spec'ed for a long life. You should get many, many hours of enjoyment out of it!

Cheers!

 

[SWeAT hOg]

How are you all doing? Sending out good feelings to all!

GREAT time to dig out some old pieces and safely ship it on!

Stay well, good friends!

 

[Roxy13]

One SG PCB harness has been sent out. And I do have one more if someone needs one.

 

[SWeAT hOg]

Time to get this rolling again....I have a single EHX EL34 tube with lots of life left in it. It would be perfect for a single tube amp....yours for postage!

 

[RainbowPunk]

Sorry for the necro-posting, but I have some stuff to unload if anyone wants it.

First up: Got a cheap P90 knockoff from a kit from The Fretwire with a couple extra covers still in protective film. Was originally in the black cover to the left, but I popped it into a relicked soapbar case from a GFS Slick Junior pickup. 50mm pole spacing; comes with 2 rusty relicked screws for mounting as a soapbar. CLAIMED

 

[jstarr]

Nice to see this thread revived. I've got some stuff to post early next week.

 

[vibroluxe]

P90? I’m in! Will PM you - thanks!

 

[SWeAT hOg]

I still have that EL34 single! Thanks for reviving the thread!