If guitar wood does not matter....

  • Thread starter Ginger Beer
  • Start date
  • This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.

Ginger Beer

Senior Member
Joined
Feb 15, 2012
Messages
4,203
Reaction score
6,890
I read several claims recently on this forum that guitar wood does not matter. That 99% of the sound is in the electronics. A concrete guitar sounds the same as a les paul and so on.

My question is...If wood does not matter, why can I take a pickup off of one guitar, put it in another and have it really sound substantially different? Be it shrill, muddy, more midrangey...why the drastic difference?
 

JTM45

Platinum Supporting Member
Joined
Jan 23, 2009
Messages
17,342
Reaction score
43,636
:io:


Lesson learned here. I'll just stick to laughing, it's better for the soul. :laugh2:
 

Tom.Ashworth

Senior Member
Joined
Oct 30, 2012
Messages
809
Reaction score
640
Because wood does matter :)
But while you may only be swapping the pickup the electronics inside the guitars may differ (pots, caps etc) and the metals used in hardware may vary. Construction also plays a large part in tone. A bolt on neck compared to a set neck will produce tonal differences. Preference of construction is arguable but it does change tone.
However wood must make a difference or in this modern world Gibsons would be made out of Balsa wood
 

Barcham

Elitist Club Member
Joined
Jun 15, 2010
Messages
10,603
Reaction score
19,992
It all depends on what name is on the headstock. :cool:
 

Ginger Beer

Senior Member
Joined
Feb 15, 2012
Messages
4,203
Reaction score
6,890
Does the tailpiece screw into the wood or is it really the other way around?
 

HRC

Senior Member
Joined
Feb 17, 2010
Messages
8,110
Reaction score
9,165
My Les Paul has a poly finish but it has worn through on the back, can the wood now breathe like a dolphin?

Yes but when you have to much to drink don't forget to let it come to the surface for air.
 

Latest Threads



Top
')