WTT: Hamer Standard Korina XT

[UncleLester]

I have a new/mint condition Hamer Standard Korina XT with the Seymour Duncan JB/59 combo. It is stock, never modded and never played out. I got it in a trade deal and I would like someone else to appreciate it and give it some play time. Let me see what you got for trade... I'm open to all ideas and offers. I will ship in the OHSC.

 

[UncleLester]

Bump

 

[brentrocks]

is this a korean made?

 

[UncleLester]

is this a korean made?

These are made in China.

 

[SlapChop]

How would you describe the neck? Chunky or thin?

 

[UncleLester]

How would you describe the neck? Chunky or thin?

In between a Gibby 60's and 50's profile. Medium.

 

[UncleLester]

ttt

 

[UncleLester]

ttt

 

[UncleLester]

ttt

 

[UncleLester]

ttt

 

[UncleLester]

ttt

 

[SiriusAbbott]

Trade offer

A mildly modified Epiphone Futura Prophecy
Jackson J-90C in the bridge position,Ibanez "lawsuit era" humbucker in the neck,CTS500K pots,a .047mF P.I.O. capacitor installed,Bridge tapped and set screws installed(like a tonepros bridge)in great shape,has a couple of very minor dings in the body,stamped "used",will ship in its original hardshell case

 

[UncleLester]

Trade offer

A mildly modified Epiphone Futura Prophecy
Jackson J-90C in the bridge position,Ibanez "lawsuit era" humbucker in the neck,CTS500K pots,a .047mF P.I.O. capacitor installed,Bridge tapped and set screws installed(like a tonepros bridge)in great shape,has a couple of very minor dings in the body,stamped "used",will ship in its original hardshell case

Thanks for the offer but I'm going to pass. I'm looking for an LP or SG.

 

[SiriusAbbott]

Thanks for the offer but I'm going to pass. I'm looking for an LP or SG.

alright then, good luck!

 

[UncleLester]

alright then, good luck!

Thanks. I'm patient and I know something will come along. Great looking Epi you got there BTW.

 

[UncleLester]

ttt

 

[G Man]

Any interest in this one? Its had some upgrades since this picture was taken. Better electronics, pups, and tuners.

 

[UncleLester]

Any interest in this one? Its had some upgrades since this picture was taken. Better electronics, pups, and tuners.

Hey G Man, the value on the Epi is bit lower than the Hamer. Can you give me some specifics on the upgrades? Thanks.

 

[G Man]

Fervor P-90s, CTS Pots, Switchcraft switch and jack, Gibson white oval button tuners, aluminum wrap tailpiece and a sweet HSC. I'll include the stock tuners and P90s as well. I put trade value at around $500, as there were not many of these made and their somewhat rare.

 

[UncleLester]

Fervor P-90s, CTS Pots, Switchcraft switch and jack, Gibson white oval button tuners, aluminum wrap tailpiece and a sweet HSC. I'll include the stock tuners and P90s as well. I put trade value at around $500, as there were not many of these made and their somewhat rare.

Hmm. Let me think about it a bit. What is the neck carve/profile like? 50's thick or 60's thin?