SOLD: Skatterbrane T-Shawbranes

myoldfriend

Suffers from GAS
Joined
Dec 5, 2016
Messages
170
Reaction score
101
Better than original Shaws IMHO, as the bridge doesn't sound thin or anemic, as original Gibson's were prone to.

Was going to keep these to the back, as these aren't made any longer.

No covers, zebra bobbins. Pro lead extensions.

At 75°:
N: 7.50Ω, ~15" lead, A5 mags
B: 7.41Ω, ~10" lead, A5 mags

$xxx via PayPal to your door in the conus.


 
Last edited:

cooljuk

Transducer Producer
Premium Member
Joined
Mar 11, 2009
Messages
15,495
Reaction score
21,450
Looks like your set has the expensive Montreux Time Machine PAF replica covers that Rod used on some humbuckers. Those are very nice.

GLWS!
 

cooljuk

Transducer Producer
Premium Member
Joined
Mar 11, 2009
Messages
15,495
Reaction score
21,450
If you just want to know the bobbin colors, all you have to do is back out one of the pole screws to determine the screw coil color.

For the slug coil, remove one of the brass screws from the baseplate under the slug bobbin. Look in the hole with a bright flashlight. Without a light, everything will look black.

No need to remove covers just to check bobbin colors on humbuckers.
 

myoldfriend

Suffers from GAS
Joined
Dec 5, 2016
Messages
170
Reaction score
101
STOPPP! Lol, or I'm going to end up putting these back in the pickup drawer again ;)

Already thinking about pilfering the covers for my own use :p
 

myoldfriend

Suffers from GAS
Joined
Dec 5, 2016
Messages
170
Reaction score
101
Reduced. Again - zebra bobbins without covers!
 
Last edited:




Top