- Joined
- Apr 4, 2013
- Messages
- 8,016
- Reaction score
- 12,486
I recently completed a paisley Tele build and at the last minute found a vintage neck to go on it instead of this one. This is a modern-ish genuine Fender neck that has been aged and I think looks really great. It's got a smooth feel to it. It's also used, so there is a bit of real fret wear as well.
The tuners shown are included with the neck. If you're not interested in them, let me know and I can adjust the price to reflect that. I did install a set of early '70s tuners as well (not included/shown) when I was doing the build, so those holes are there and can be seen if you look closely between the current tuners (see close-up pics below).
I'll include an unfinished nut as well. I started shaping it, but never finished when I found the '71 neck. It's still unslotted as well.
Here are some specs:
Width at the nut: 1.676" (between 1 5/8" and 1 11/16")
Width at the heel: 2.200"
Thickness at 1st fret: 0.834"
Thickness at 12th fret: 0.886"
Radius: modern 9.5"
Asking $275 PP/shipped.
The tuners shown are included with the neck. If you're not interested in them, let me know and I can adjust the price to reflect that. I did install a set of early '70s tuners as well (not included/shown) when I was doing the build, so those holes are there and can be seen if you look closely between the current tuners (see close-up pics below).
I'll include an unfinished nut as well. I started shaping it, but never finished when I found the '71 neck. It's still unslotted as well.
Here are some specs:
Width at the nut: 1.676" (between 1 5/8" and 1 11/16")
Width at the heel: 2.200"
Thickness at 1st fret: 0.834"
Thickness at 12th fret: 0.886"
Radius: modern 9.5"
Asking $275 PP/shipped.
Last edited:
