- May 14, 2020
- Reaction score
I measured the body thickness of my MIJ custom at 1 inch & 30/32nds & was wondering what an actual gibby custom is. My standard is 2 inches.
Thanks for your reply with the measurements. I've also noticed there is a small variation between the top & bottom of the body. Not by much though. I was just curious if the made in Japan epiphones were similar to an actual gibson and it appears they are very close. All of the hardware mounting holes are the same also. I measured my 1959 Epiphone thickness and surprisingly, it is thinner than Gibson Studio's and Tribute's.I took mine on the top of the body almost directly above the saddle.