Help with OOP tone pot wiring

[db3266]

I have a neck pickup with 4 conductor wiring, I have a push push tone pot that I will use as the neck tone pot and a switch to go in and out of phase (OOP selected with the switch in the out position).

Does anyone have a wiring diagram that I can use as a guide?

 

[ARandall]

I think google might

 

[dmoss74]

 

[db3266]

there are only two wires on the neck pickup in the diagram above? I have a 4 conductor wired pickup.

 

[ARandall]

You will need to figure out the colour codes for the pickup you have. The ones you want to solder there are the pickup start and end wires.

 

[db3266]

Black =start of screw coil
White = finish of screw coil
Red = start of slug coil
Green = finish of slug coil