Does anyone know if Gibson will accomodate a Serial Number verification for Epiphones like they do for Gibson ? Say to get the specs, where it's made etc ? Reason I'm asking is I'm looking in this epiphone les paul custom supposedly made in 90s with no letters, all numbers. 1020xxxxx
Epiphone Serial Numbers
- Thread starter mhz
- Start date
This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.
The first letter is a 1. I tried the guitardate project but nothing. I just have the serial from the seller, 102012444 Here are some images from seller
napsak
Banned
- Joined
- Apr 3, 2011
- Messages
- 1,131
- Reaction score
- 1,556
MHZ,I ran it through guitar dater project.Using the first number "1" then the rest of the serial number showed NO results.Omitting the number "1" and making it an I showed this...
Your guitar was made at the
Saein Plant, Korea/China
January 2002
Production Number: 2444 : Maybe the seller has it bass ackwards.Good luck.
Your guitar was made at the
Saein Plant, Korea/China
January 2002
Production Number: 2444 : Maybe the seller has it bass ackwards.Good luck.
Hey man, I'm no expert at all, but I reckon you should run it by the guys on the 'fake epi' thread... it just looks to me like the washers on the tuners are larger than normal and nearly overlapping the diamond motif, and the 'Epiphone' logo on the headstock looks a bit too far over to the left. Also the truss rod cover is almost overlapping the diamond motif too... I might be way off the mark but it couldn't hurt to get one of the guys in the know to look it over for you.
paruwi
Kraut-Rocker
- Joined
- Dec 24, 2009
- Messages
- 22,314
- Reaction score
- 32,650
Yep !
That's exactly what I was trying to tell him
This one isn't closed....
http://www.mylespaul.com/forums/epiphone-les-pauls/31153-fake-epiphone-thread-ii-261.html
Yep !
That's exactly what I was trying to tell him
This one isn't closed....
http://www.mylespaul.com/forums/epiphone-les-pauls/31153-fake-epiphone-thread-ii-261.html
Thanks for the link to the new thread! I double checked with the seller and he insisted that the first character is one instead of I. I had initially tried with and I on guitar dater and it worked but then he insisted that it was a 1. Thanks!
There's a serial, I posted is earlier on the thread, I just don't have a photo of the back of the headstock
napsak
Banned
- Joined
- Apr 3, 2011
- Messages
- 1,131
- Reaction score
- 1,556
Yep !
That's exactly what I was trying to tell him
This one isn't closed....
http://www.mylespaul.com/forums/epiphone-les-pauls/31153-fake-epiphone-thread-ii-261.html
I actually thought the washers looked a little big on the tuners myself but then I eyeballed the alignment of the top volume nobs to the pickguard screw and thought maybe it was my eyes at such a late hour.Sin can probably help the OP.
I just bought a used Epiphone Les Paul Studio that appears to be authentic in every way, and why would you fake the most inexpensive Les Paul around? Anyway I cant decode the serial number 09121508331. Any help out there? It is decal'ed on the back of the headstock along with the "hand-crafted in China" sticker and the "inspectioncard QC" sticker.
Sirzach
Senior Member
- Joined
- Jul 21, 2009
- Messages
- 2,845
- Reaction score
- 1,369
Well...
It's not fake. At least, I really, really doubt that it is. With that TRC, the serial begins with I. For your serial to begin with a 1, it would have had to have been made in the years 2010-2019 (unless they change the format, again).
Also, Korean Epi's aren't fake, but aren't the exact same to the Chinese. They have some differences that would be seen on fake epi's..but can be real.
If it seems like a great deal, aka way too cheap, then it is a sign that its fake.
It's not fake. At least, I really, really doubt that it is. With that TRC, the serial begins with I. For your serial to begin with a 1, it would have had to have been made in the years 2010-2019 (unless they change the format, again).
Also, Korean Epi's aren't fake, but aren't the exact same to the Chinese. They have some differences that would be seen on fake epi's..but can be real.
If it seems like a great deal, aka way too cheap, then it is a sign that its fake.
Is the serial # on a white sticker near the end of the headstock? i.e., possibly a "used" or "2nd" if that is the case. Although, I've seen Sheratons from the 80's with stickers instead of stamps. I believe they are from the Samick Korea plant.
Or is # actually stamped on the headstock? Because the newer epis are coming from China with no letters. A number beginning with 10 would be a 2010. But I don't believe that is the case here, because of the "Gibson" on the TRC.
That's my 2 cents...There's some some real knowledgeable folks on epi's over at the epi forum who could probably tell for sure.
Or is # actually stamped on the headstock? Because the newer epis are coming from China with no letters. A number beginning with 10 would be a 2010. But I don't believe that is the case here, because of the "Gibson" on the TRC.
That's my 2 cents...There's some some real knowledgeable folks on epi's over at the epi forum who could probably tell for sure.
- Joined
- Apr 17, 2011
- Messages
- 5,303
- Reaction score
- 5,346
Spirithawk
Senior Member
- Joined
- May 24, 2011
- Messages
- 1,952
- Reaction score
- 4,061
Guess I'm a tad late but here's the link if anyone wants to find out when and where thelr Epi's were made.
The Guitar Dater Project
The Guitar Dater Project
paruwi
Kraut-Rocker
- Joined
- Dec 24, 2009
- Messages
- 22,314
- Reaction score
- 32,650
The guitardater don't recognize the serial# Epiphone is using since mid 2008
OK. Can I jump into this fray? I have an Epiphone Gibson Les Paul copy. It doesn't say Les Paul on the headstock (or anywhere else for that matter). There is nothing on the back, but at the top of the body there is a plate that says HAND-CRAFTED IN KOREA BY EPIPHONE, The Epiphone Company, Nashville, Tennessee USA, then this serial number; 099040300. I have checked every forum and website I can find (including Guitar Dater) and the serial number isn't recognized. HELP!! What do I have?
