6L6,6V6,5Y3, 12AX7, 12AT7 & 12AU7 tubes for sale

davestp1

Senior Member
Joined
Apr 5, 2009
Messages
509
Reaction score
59
6L6's: All measure at or very near NOS levels. Measurements taken on a Mercury Magnetics 1100A, with NOS between 65 and 70. Anything above 50 is a good tube.
Tubes pictures by daveandchris - Photobucket
Pair 5 64/60 (67-30 on one tube, 62-52 on the other) $75
Pair 6 - GE labelled RCA greys. Dual Side D Getters 65/69 (1064 on base on both) $50
Pair 8 - Tungsol GE labelled 5881's. 65/64 (3226041-3 on one tube, H2 Zx on the other) $40
Pair 10 - 6L6WGC/5881 Sovteks 64/66 $20
Pair 11 - Mesa Boogie STR 440 6L6GC's. 67/66 $30
Single 6L6GB (GE labelled, appears to be a Sylvania Blackplate with top D getter)$20
Single 6L6GC Mesa tube(Chinese?) I'll throw this in with any bulk purchase
6V6's ($10 each)
6V6-5Y3 Tubes pictures by daveandchris - Photobucket
-Hytron 6V6GT Made in USA on base.Grey Glass. Measures 61
-Hitachi 6V6-GT Blackplate Made in Japan. Measures 60
5Y3's (same link as the 6V6's) ($10 each)
All measurements on a Mercury Magnetics where anything over 25 is a good rectifer.
-RCA Hallicrafters 5Y3GT Blackplate Made in USA P280C 59-33 printed on base. Measures 65/70
-RCA 5Y3GT Blackplate Made in Canada Slightly loose base, works fine 64/71
-Sylvania 5Y3GT Greyplate Made in USA 66/73
-Sylvania 5Y3GT Blackplate Made in USA 052 MUV 65/73
-Sylvania 5Y3GT Greyplate Made in USA 68/75
12ax7 and 7025 tubes, USA or Canada, grey and black plate . All measure at or near NOS/ANOS levels. Anything over 50 is a good tube with NOS between 60 and 70. While almost all of the tubes appear and measure at new levels, they should be considered pulls. All US made unless noted

8 - GE 12AX7's (shortplates $20 each) 66/66, 66/66, 71/72, 68/67, 71/71, 67/65, 67/68, 65/55
2 - GE 7025's longplates ($20 each) 64/65, 67/67
2 – GE 12AX7A longplates, one CBS Label,(64/63) one Raytheon Uniline (65/64)($20 each)
2 - GE 6681/12ax7 longplates, one labelled RCA(62/62) other with a yellow tip (65/65) ($20 each)
5 – Raytheon Blackplate 12AX7A Baldwin Yellow Labled's ($35 each) (64/65, 65/62, 60/60, 65/63, 66/65)
2 - Baldwin 12AX7 Green Labled Sylvanias ($20 each)(75/75 and 74/75) Great strong tubes!
1 - Grey plate RCA 12AX7A (Lafayette 55/58) $20
2 – Grey plate RCA 12AX7A/7025A Made In Canada (70/70, 65/65) ($25)
3 – Grey Plate RCA 12AX7A US made 66/68, 67/66, 66/67 ($20)
2 – RCA blackplates (1-motorola Canada Halo Getter 65/65, 1-rectangular getter 65/64 $35 each)
2 - RCA 12AX7 Greyplates printed ARBI P28063-290 on one (66/67), the other ARBI 28B3 (58/65)
2 – RCA Greyplate 7025A/12AX7A Canada 65/65, 7025A USA 72/74
3 - Sylvania's 12AX7’s 75/75, 60/60, 56/($20 each)
2 - Sylvania 12AX7A (Zenith labled 80/80) Sylvania Label 70/68 ($25)
1 – Sylvania 12AX7A/ECC83/7025 ($25) (80/82)
6 - Sovtek 12ax7wxt tubes,($25 for all) (72/72, 73/70, 73/70, 68/68, 70/70, 67/70)
4 - MesaBoogie 12ax7's (chinese) ($15 for all) (70/70, 73/73, 70/70, 69/73)
1 Realistic Lifetime Japan 7025, 65/68, ($10)
1 Realistic Lifetime Japan 12AX7 70/70 ($10)
1 Magnavox Japan 12AX7 62/65 ($15) (Matsushita, Mullard tooling, flash on start up)
1 Marconi Radiotron Japan 12AX7A 64/64 ($10)

12AU7's (One RCA Clear Top, Side D Getter, 65/66) One GE/Philco 65/63) ($20 for the pair)

12AT7's Except as noted, all tubes are $10
5 NOS/NIB GE's, 88/87, 86/86, 87/87, 86/87, 88/90 ($15)
4 NOS/NIB JAN GE 12AT7WA's, 85/85, 88/87, 86/87, 87/87 ($15)
2 Sylvania 12AT7 65/62, 54/80
1 Sylvania 12AT7 BlackPlates, square getter, 67/65 ($15)
1 RCA 12AT7, CBS Hytron Label 80/80 D Getter
1 Sylvania 12AT7WA, 84/84 ($15)
2 JAN Philips 12AT7WC, 85/85, 84/85 ($15)
4 JAN GE 12AT7WC/6201 (ANOS), 85/85, 85/85, 85/85, 85/85 ($15)
5 Grey plate RCA's, 84/83, 75/79, 82/76, 80/77, 82/80,
1 RCA 12AT7WA JRC Triple Mica Black Plate 86/84 ($15)
1 Marconi 12AT7 (Canada) (84/83),
1 RCA 12AT7 LC2G Blackplate 84/80, ($15)
1 GE 12AT7 Rectangular Getter 85/75
1 RCA 12AT7 Canada 83/85
PM or email [email protected]
 

davestp1

Senior Member
Joined
Apr 5, 2009
Messages
509
Reaction score
59
Make an offer, these prices are not carved in stone. These US/Canadian and Japanese tubes will outperform any new production tubes.
 

Latest Threads



Top