General Information
Finish: Gold top
Top Material: Maple
Body Material: Mahogany
Body Details: Mahogany solid body with maple cap.
Neck Material: Mahogany
Fingerboard Material: Rosewood
Neck Profile: medium "C"
Neck Thickness (IN): 1st- .82" 12th- .96"
Fretboard Radius: 12"
Nut Width: 1-11/16"
Scale Length: 24-3/4"
Weight: 9 lbs 15 oz (at the time of purchase, prior to the mods I’ve added)
Customizations
Electronics:
-Bridge Pickup: Seymour Duncan JB with a smooth alnico II bar magnet
-Neck Pickup: Seymour Duncan Alnico II Pro
-Peter Green Mod (neck and bridge magnets are out of phase with respect to one another in the middle position)
-Toggle switch: Freeway switch 6-way toggle
-Bridge Volume Knob: 1M push/pull phase switch with treble bleed
-Bridge tone: 500k push/pull (treble cut / bass cut)
-Neck volume knob: 1M with treble bleed, push for momentary kill switch
-Neck tone knob: Modified Fender TBX tone control (250k/1M concentric tone pot with center detent. No load in the center position. Counterclockwise from center cuts treble, clockwise from center cuts bass)
Hardware:
-Hipshot locking tuners
-Pinnacle solid machined bell brass tune-o-matic bridge
-Brass nut with individually adjustable string heights
-String Butler to ensure straight pull through the nut / improved tuning stability
-Custom toggle switch poker chip labeled “chug” and “shred”
-Volume knobs that go up to 11
-Cream colored control cavity plates rather than black plastic plates
-Bridge Pickup: Seymour Duncan JB with a smooth alnico II bar magnet
-Neck Pickup: Seymour Duncan Alnico II Pro
-Peter Green Mod (neck and bridge magnets are out of phase with respect to one another in the middle position)
-Toggle switch: Freeway switch 6-way toggle
-Bridge Volume Knob: 1M push/pull phase switch with treble bleed
-Bridge tone: 500k push/pull (treble cut / bass cut)
-Neck volume knob: 1M with treble bleed, push for momentary kill switch
-Neck tone knob: Modified Fender TBX tone control (250k/1M concentric tone pot with center detent. No load in the center position. Counterclockwise from center cuts treble, clockwise from center cuts bass)
Hardware:
-Hipshot locking tuners
-Pinnacle solid machined bell brass tune-o-matic bridge
-Brass nut with individually adjustable string heights
-String Butler to ensure straight pull through the nut / improved tuning stability
-Custom toggle switch poker chip labeled “chug” and “shred”
-Volume knobs that go up to 11
-Cream colored control cavity plates rather than black plastic plates
