cmjohnson's latest activity
-
cmjohnson replied to the thread Exile Custom Guitars - my first move into complete custom guitars.For the rear strap button I'd just counterbore a spot for the strap button, on axis with the centerline of the guitar. But be careful... -
cmjohnson replied to the thread Right glue for reseating lifting inlays?.Based on prior experience, I say that the best option is to pull the inlay out completely, clean the gluing surfaces thoroughly, and...
-
cmjohnson replied to the thread Exile Custom Guitars - my first move into complete custom guitars.I tend to be somewhat judgemental, particularly about body shapes. And I'm a very traditionalist kind of person. My opinions: I LIKE...
-
cmjohnson replied to the thread Fret size preference vs 'correct'?.In my opinion, either choice you make is correct. A Burny is only moderately collectible, not one of the real high value collectibles...
-
cmjohnson replied to the thread Fret size preference vs 'correct'?.When dealing with vintage instruments, there are "correct" fret sizes and that might be important for restoration purposes...
-
cmjohnson replied to the thread Fret size preference vs 'correct'?.If the frets were objectionably low, I'd refret the instrument without hesitation. I've done enough fretjobs that it's something I...
-
cmjohnson replied to the thread Fret size preference vs 'correct'?.I like my frets tall. Period. Don't care if they're skinny or wide, but they need to be tall. If the remaining fret height is under...
-
cmjohnson replied to the thread Gibson Les Paul Custom 'Refinish' + Modifications.In my limited experience spraying solid colors, the color coat is typically a very thin layer and overcoated with a much thicker...
-
cmjohnson replied to the thread Gibson Les Paul Custom 'Refinish' + Modifications.Tip for you next time: Masking off and painting just the area to be repaired can work if you're using solid colors and have an exact...
-
cmjohnson replied to the thread ADVICE NEEDED TO SET UP A GIBSON WITH A LIGHTNING BAR WRAP AROUND TAILPIECE AND ZERO FRET ADJUSTABLE NUT?.I'm sure it's "close" and I'm aware of its adjustable height feature. But be aware that no company as of yet is making guitars with...
-
cmjohnson replied to the thread ADVICE NEEDED TO SET UP A GIBSON WITH A LIGHTNING BAR WRAP AROUND TAILPIECE AND ZERO FRET ADJUSTABLE NUT?.If you're going to be adjusting the height of the zero fret itself along the ridge, to fine tune and shape its curve, and it's titanium...
-
cmjohnson replied to the thread ADVICE NEEDED TO SET UP A GIBSON WITH A LIGHTNING BAR WRAP AROUND TAILPIECE AND ZERO FRET ADJUSTABLE NUT?.I can pretty much guarantee that any pre-slotted nut will have the nut slots cut higher than optimum, and probably by a great deal. A...
-
cmjohnson replied to the thread ADVICE NEEDED TO SET UP A GIBSON WITH A LIGHTNING BAR WRAP AROUND TAILPIECE AND ZERO FRET ADJUSTABLE NUT?.I see no reason to go with the titanium version of the zero fret nut. No doubt it's more expensive, and titanium is very hard to work...
-
cmjohnson replied to the thread HELP NEEDED: Hand Rubbed Stains.You don't need a spray booth. It's nice to have but hardly a requirement. Incidentally, most auto paint supply shops have the...
-
cmjohnson replied to the thread HELP NEEDED: Hand Rubbed Stains.Some company in your area must surely repair cars after an auto accident. They get their paint supplies from somewhere! Ask them.
Latest Threads
-
-
Standard 60’s video, flipped bridge pickup doesn’t sound too bad!- Started by InTheEvening
- Replies: 0
-
-
-
