Recent content by 7oel

  1. 7

    Got a real pain in my neck

    Took your advice and took about .5 of a mm off the bass side. Looks heaps better. The neck will get shave down to the fingerboard. Did it that way as I saw it in the Benedetto book
  2. 7

    Got a real pain in my neck

    Should I take it off the tenon or the body or doesn’t really matter?
  3. 7

    Got a real pain in my neck

    So I have a neck alignment issue. This is my first les paul build and I know my methodology is already incorrect and will avoid this next time. But I think I have 2 fixes. A. Glue a bit of mahogany into the treble side and re rout the neck pocket. Or b. Blend it in with some binding goop and...
  4. 7

    Post Guitars You Built

    First two builds Working on some 59 standard templates currently
  5. 7

    59 les paul body thickness at heel?

    How did math give us the answer?
  6. 7

    59 les paul body thickness at heel?

    I’ll try it 50 mm and see how high the bridge wants to sit up. Thanks everyone
  7. 7

    59 les paul body thickness at heel?

    Am using the gold standard plans found on this forum which give everything except the heel thickness. Still making the templates up currently will be shooting for a 4 degree neck angle an correct body thickness which off the top of my head is about 60 mm at the bridge.
  8. 7

    59 les paul body thickness at heel?

    What is the 59 burst body thickness at heel? From what I can tell it’s about 48mm. Or about 10mm thicker than the neck tenon?
  9. 7

    If I was to make a dc jr with a humbucker I would?

    If only you could get them in Australia at a reasonable price
  10. 7

    If I was to make a dc jr with a humbucker I would?

    So any where not ridiculous will work. Thanks
  11. 7

    If I was to make a dc jr with a humbucker I would?

    The dude implies sarcasm also
  12. 7

    If I was to make a dc jr with a humbucker I would?

    That’s just like your opinion man
  13. 7

    If I was to make a dc jr with a humbucker I would?

    Wasn’t there an issue with early juniors with the treble side bridge post and not enough meat in front of it?
  14. 7

    If I was to make a dc jr with a humbucker I would?

    Put it center it to where the p90 rout is or use the end of the rout closest to the bridge and move it north so to speak?
  15. 7

    Nut cutting

    Could the nut be moved forward?

Latest Threads



Top