Separate names with a comma.
Discussion in 'Member Classifieds' started by b-squared, Apr 10, 2009.
Ah man, I couldve used a strap.
Shoulda checked here earlier
Got some black stopbar inserts here.
I just got done sorting a few years worth of inner-tubes. Repaired what I could (so they can ride again), and have these left over. Most have had the valve section cut off.
I've heard these can be useful for clamping , in jigs, and adding tension for binding, etc.
Free to a good home. I'd ship them wadded into a bubble-envelope, or small box.
Still have these.
Also I'm giving out a few 2 foot lengths of 22-gauge 4-conductor shielded wire. I don't know yet how many I'll give out, but we'll see.
(Need to charge shipping if outside U.S.)
Hey, I could use a piece of two of that shielded wire.
I decided that for now I'll only give out 5 more lengths, 2 feet long each: plenty to wire an LP from switch to jack. I'll strip the outer jacket if you want me to, but I only did it with that one to show the leads.
Thought I would add another to the pile as I have picked up a few things I needed.
New 5-ply black (B/W/B/W/B) pickguard for a Gibson LP.
Check drawing for fit and dimensions.
Nice piece with chamfer in between pups.
Time to get rid of that cheep looking single ply guard!
I have no idea where I got this. I may have ordered it by mistake or it was mistakenly given to me in an order instead of a mono. But I have no use for it. I can adapt an upcoming project for it, but I don't think so.
1/4" Stereo Jack
All of these are still available, but money's very tight and if you want them I wouldn't mind getting a small PayPal donation for shipping. Not necessary, but would be appreciated.
Black Stopbar Bushings
Shielded 4-conductor wire, braided 22 AWG, I have 5 two-foot lengths. A little stiff, but more than suitable to run from the switch to the controls and jack. Let me know if you want me to strip the ends for you.
1/4" Stereo Jack.
Anybody remember this thread ?
The amp now is at a second local tech to see if there is anything to do with it. The first one didn't even want to look at it. If it comes back with the same comment, it will go to whoever wants it. If not it'll get dismantled. I'll keep the hardware (screws and knobs) and chuck the remains.
Any taker ?
BTW, I am keeping the cab and its speaker, the power cord and tube. Just giving the chassis as in the image above. All the lights go on, the tube glows (not really, but there is something going on there). Line out worked until I did the cut-off mod (can be easily reversed). No sound to speaker.
Message me if interested. Free shipping to lower 48. I have
1. One black three ply pickguard for Epi Sheraton made by Twang. Brand new and never installed, could also be used for an ES-335 or similar guitar with some filing.
2. Black straplock buttons
3. Electronics and pickups from a Squier 51
4. Raw aluminum control plate for telecaster, drilled for two pots and a three way toggle switch
5. Six Fender-style saddles for an Asian import bridge
Anyone in need of Marshall Style Black and Silver knobs? They are the push on style. I have 20 of them. I accidentally ordered the wrong ones, I need set screw style. So I am offering these here as I have no use for them. Will mail out standard first class mail free of charge. PM me if you are interested. They are literally brand new, but NOT genuine Marshall. They came from China.
No-bevel pickguards for Epiphone Les Paul Standards
Here are a couple pickguards that I made using a stock Epiphone pickguard as a template. Dump that goofy thick-beveled stock pickguard something more Gibson-like. These will only fit the Epi Les Paul so please claim only if you have a guitar to match.
9 Knobs left.
Gone to Mr.Moon
Not music related, but hey someone could use it.
I have a graphics card I found in the corner of my basement. I remember buying it but never using it. Maybe someone will have a use for it.
Pay for the shipping and its yours free