Help - pick up wiring

Discussion in 'Luthier's Corner' started by bionicmark, Sep 18, 2017.

  1. bionicmark

    bionicmark Senior Member

    Messages:
    168
    Likes Received:
    6
    Joined:
    Jun 29, 2009
    .
     
    Last edited: Sep 21, 2017
  2. D Rhinehart

    D Rhinehart Senior Member

    Messages:
    262
    Likes Received:
    124
    Joined:
    Dec 13, 2011
    Well by looking at the pics it looks correct , are the leads of the caps laying on the conductive coating ? and I dont see the ground for the bridge in the pics
    After looking again at the pics , is the bridge pup grounded sufficiently ?
     
  3. ARandall

    ARandall Senior Member

    Messages:
    10,832
    Likes Received:
    6,023
    Joined:
    Apr 16, 2012
    Out of phase only comes into play when 2 pickups are selected. 1 pickup by itself is close to impossible to be OOP - especially as they seemed fine in the other guitar.

    Try re-doing all the grounded joints. The back of pot connections are the ones most likely to be poor as many lower powered irons don't get hot enough to really melt the solder.
     
    mux164 likes this.

Share This Page