Separate names with a comma.
My LP is a 2001
It’s already a replacement tusq nut from graph tec
I’ve decided I’ll begin by doing the least invasive thing- changing the string gauge
Actually I’m pretty sure it’s the nut causing the buzz
Using the video, I set it up. I capoed the first fret and tuned to pitch and it was...
Using the fret rocker, I checked ..no raised frets that I can tell
Also neck is straight, I used the notched straight edge to check.
Strung it up, works fine !!
I actually just found some thinner washers I had laying around from a kluson tuner set I wasn’t using. I put them in and i think it’ll work
I took out the washers and left the ump plates and it looks correct now
FYI my headstock thickness is 15mm...not sure which posts...
Thanks for the tip
Started watching the video but getting super low action on the first fret high E. In fact the string is hitting it untouched. The neck is straight...
They are 3x3, not 6 in line so they are not staggered. To verify, before I installed them, I measured them. They are all the same height posts,...
Yes I got the umps and one bushing and one washer for each tuner
Mine have less room for strings
First set of Locking tuners I’ve ever owned/had experience with.
installed on 1996 Epiphone Dot (335)
Noticed the posts are suuuuper low and the...