Hamer pots!

richedie · 03-12-2008, 03:59 PM

Hey guys!

I just got some Hamer pots but I still have that stupid plate in my LP. Do most of you remove those? I have that thing in both my Standards but maybe I should yank em out! Only thing is, then i have to change all my pots to short shaft. LOL.

My one Hamer I just got is 468k and the other is 529k so I guess they still vary a lot like other CTS pots. Seem real solid.

Rich

Davey Rockets · 03-12-2008, 06:53 PM

richedie, where did you get Hamer pots? And what values did you get (250? 500k? 300k?)

inxs996 · 03-12-2008, 07:05 PM

Quote:

Originally Posted by richedie

Hey guys!

I just got some Hamer pots but I still have that stupid plate in my LP. Do most of you remove those? I have that thing in both my Standards but maybe I should yank em out! Only thing is, then i have to change all my pots to short shaft. LOL.

My one Hamer I just got is 468k and the other is 529k so I guess they still vary a lot like other CTS pots. Seem real solid.

Rich

hey rich, just what plate are you talking about, is it that silver colored plate that is inside the electronics cavity,

i have a epiphone and don't have that plate, is that something that is just in gibsons...

dwagar · 03-12-2008, 07:32 PM

even removing the plate, you may still need long shaft pots.

twinrider1 · 03-12-2008, 08:19 PM

Hold on before you yank that plate. I'm not certain but I think I read that to get the short shaft pots to work you'll still have to dremel out some wood.
Like I said, I don't know for sure, but check it out.

richedie · 03-12-2008, 08:45 PM

I got the Hamer pots at BCR Music in PA. You can call them.

How do so many guys use Hamers in their LPs? I know Greg at BCR said I could remove the plate and be set! However, now you guys have me worried. I could try next time I yank the plate. Maybe I'll hold onto these and try, but I'll still need more short shaft pots.

This is the plate in the cavity that holds the electronics. I thikn Gibby does it for production reasons.

dressed2kill · 03-13-2008, 06:47 AM

It's odd, in one standard I could remove the plate and short pots fit no problem, in my studio not a chance. Worst case lift the plate up with the other pots and see if you can fit the short pots in there, will give you an idea if you need the long pots or not.

richedie · 03-13-2008, 10:55 AM

Anyone here using them or juts use plain standard CTS?

03-12-2008, 03:59 PM	#1 (permalink)
richedie Senior Member Join Date: Jan 2008 Posts: 301	Hamer pots! Hey guys! I just got some Hamer pots but I still have that stupid plate in my LP. Do most of you remove those? I have that thing in both my Standards but maybe I should yank em out! Only thing is, then i have to change all my pots to short shaft. LOL. My one Hamer I just got is 468k and the other is 529k so I guess they still vary a lot like other CTS pots. Seem real solid. Rich

03-12-2008, 06:53 PM	#2 (permalink)
Davey Rockets Senior Member Join Date: Jan 2008 Location: Freakin La La Land Posts: 173	Re: Hamer pots! richedie, where did you get Hamer pots? And what values did you get (250? 500k? 300k?)

03-12-2008, 07:32 PM	#4 (permalink)
dwagar V.I.P. Member Join Date: Jul 2007 Location: Calgary, Canada Posts: 2,120	Re: Hamer pots! even removing the plate, you may still need long shaft pots.

03-12-2008, 08:19 PM	#5 (permalink)
twinrider1 Senior Member Join Date: Apr 2007 Posts: 266	Re: Hamer pots! Hold on before you yank that plate. I'm not certain but I think I read that to get the short shaft pots to work you'll still have to dremel out some wood. Like I said, I don't know for sure, but check it out.

03-12-2008, 08:45 PM	#6 (permalink)
richedie Senior Member Join Date: Jan 2008 Posts: 301	Re: Hamer pots! I got the Hamer pots at BCR Music in PA. You can call them. How do so many guys use Hamers in their LPs? I know Greg at BCR said I could remove the plate and be set! However, now you guys have me worried. I could try next time I yank the plate. Maybe I'll hold onto these and try, but I'll still need more short shaft pots. This is the plate in the cavity that holds the electronics. I thikn Gibby does it for production reasons.

Today
Les Paul	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on My Les Paul Forums

03-13-2008, 06:47 AM	#7 (permalink)
dressed2kill Member Join Date: Feb 2008 Posts: 38	Re: Hamer pots! It's odd, in one standard I could remove the plate and short pots fit no problem, in my studio not a chance. Worst case lift the plate up with the other pots and see if you can fit the short pots in there, will give you an idea if you need the long pots or not.

03-13-2008, 10:55 AM	#8 (permalink)
richedie Senior Member Join Date: Jan 2008 Posts: 301	Re: Hamer pots! Anyone here using them or juts use plain standard CTS?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hamer Factory tour	FLICKOFLASH	My Other Guitars	6	08-15-2008 04:28 PM
Don't let Will Boggs have all the fun. Hamer for sale!	BCRGreg	Business Classifieds	8	05-14-2008 09:15 AM
Hamer, Gretsch, Epi LP, 70s LP copy, Hwy1	sumphead	Member Classifieds	1	04-27-2008 09:00 AM
BCR Greg! Hamer Content!	WBPickups	My Other Guitars	24	04-01-2008 10:23 AM
Hamer Hybrid $100 Project	El Toro	Online Auctions	7	03-24-2008 02:43 PM