Randy Rhoads

WSR66 · 08-04-2008, 04:22 PM

How do I get a proper Randy Rhoads sound with my setup?
I have an Epi Les Paul Standard, Gibson Faded SG, Shecter Damien FR, Marshall Valvestate Halfstack, Marshall Guv'nor OD, Danelectro Wasabi OD, Dunlop Wah, MXR Delay, and Digitech Grunge. Any help is appreciated. Thank you everyone!

Termanator7 · 08-04-2008, 07:22 PM

I am a HUGE Randy Rhoads fan and I'm getting a Line 6 Spider 3 Amp and I think it has a Randy Rhoads setting on it. So if you are looking for a new amp go chase after the Line 6 Spider 3.

arcanis494 · 08-04-2008, 07:42 PM

Nailed right there!:

YouTube - Doug Aldrich demostration with Marshall 1959RR @ NAMM '08

Sounds like a ton of bass dialed in.

I really like Randy's tone and playing!

Good luck on finding your tone!

WSR66 · 08-04-2008, 08:15 PM

Quote:

Originally Posted by arcanis494

Nailed right there!:

YouTube - Doug Aldrich demostration with Marshall 1959RR @ NAMM '08

Sounds like a ton of bass dialed in.
http://www.mylespaul.com/forums/newr...reply&p=245029
I really like Randy's tone and playing!

Good luck on finding your tone!

yes, but I don't have $4500 to drop on an amp. I have about $300 to spend on pedals and pickups. And thank you!

Termanator7: I am just going to ignore that. I have the 15 watt and it is flat out horrible. no offense.

River · 08-04-2008, 08:30 PM

Quote:

Originally Posted by WSR66

yes, but I don't have $4500 to drop on an amp. I have about $300 to spend on pedals and pickups. And thank you!

Try to find a used Line 6 POD and some headphones. Work up from there. If you don't pay too much for the POD you can break even on it when you decide on an amp and effect(s). The POD will let you try just about every variable in the equation except for pickups - even speaker cabinets. Just models, not the real things - but most of the models are pretty accurate (IMO), and will at least get you in the right neighborhoods.

WSR66 · 08-04-2008, 09:00 PM

Quote:

Originally Posted by River

Try to find a used Line 6 POD and some headphones. Work up from there. If you don't pay too much for the POD you can break even on it when you decide on an amp and effect(s). The POD will let you try just about every variable in the equation except for pickups - even speaker cabinets. Just models, not the real things - but most of the models are pretty accurate (IMO), and will at least get you in the right neighborhoods.

Thanks, but I want to keep it all analog.

River · 08-04-2008, 09:05 PM

Quote:

Originally Posted by WSR66

Thanks, but I want to keep it all analog.

I understand. Most if not all of the models are of analog devices. I'm just proposing it as a way of narrowing the field based on your own impressions instead of ours.

WSR66 · 08-04-2008, 09:14 PM

Quote:

Originally Posted by River

I understand. Most if not all of the models are of analog devices. I'm just proposing it as a way of narrowing the field based on your own impressions instead of ours.

Thanks so much. I was just thinking what OD's/Distortions will sound the closest.

EDIT: omg I'm a idiot. MXR Distortion +. Danget.

Splattle101 · 08-05-2008, 08:20 AM

I had a quick look at the NAMM vid, and to get anywhere near that sound you will need a closed cabinet. A 4 x 12, or something similar. A bit like your Valvestate head and cab, really.

No open-backed combo by itself will quite nail it. You might get it with a Mesa and an extension cab, for example, but to get his bass response at volume you need a closed cab.

As far as gain is concerned, your preamp and Guvnor should do it. You will then need to tweak your EQ and and be ready to ride your volume control.

cheers,
Splat

WSR66 · 08-05-2008, 10:40 AM

Quote:

Originally Posted by Splattle101

I had a quick look at the NAMM vid, and to get anywhere near that sound you will need a closed cabinet. A 4 x 12, or something similar. A bit like your Valvestate head and cab, really.

No open-backed combo by itself will quite nail it. You might get it with a Mesa and an extension cab, for example, but to get his bass response at volume you need a closed cab.

As far as gain is concerned, your preamp and Guvnor should do it. You will then need to tweak your EQ and and be ready to ride your volume control.

cheers,
Splat

Thank you! Very helpful! Yes I have a closed cab. I also have the EQ: Bass Slightly Scooped (4), Mid Boosted (7), Treble about even (5-6).

FYI its an MG412.

Dave67 · 08-07-2008, 03:29 PM

Randy Rhoads Equipment
A full list of randys gear.

08-04-2008, 04:22 PM	#1 (permalink)
WSR66 Member Join Date: Jul 2008 Posts: 72 Thanks: 0 Thanked 0 Times in 0 Posts	Randy Rhoads How do I get a proper Randy Rhoads sound with my setup? I have an Epi Les Paul Standard, Gibson Faded SG, Shecter Damien FR, Marshall Valvestate Halfstack, Marshall Guv'nor OD, Danelectro Wasabi OD, Dunlop Wah, MXR Delay, and Digitech Grunge. Any help is appreciated. Thank you everyone! __________________ Gear- Gibson Faded SG Epi LP Standard Epi Valve Junior Marshall Valvestate Halfstack Digitech Grunge MXR Carbon Copy Delay Crybaby Wah Marshall Guv'nor OD

08-04-2008, 07:22 PM	#2 (permalink)
Termanator7 Senior Member Join Date: Mar 2008 Location: Sacramento, Ohio Posts: 975 Thanks: 1 Thanked 0 Times in 0 Posts	Re: Randy Rhoads I am a HUGE Randy Rhoads fan and I'm getting a Line 6 Spider 3 Amp and I think it has a Randy Rhoads setting on it. So if you are looking for a new amp go chase after the Line 6 Spider 3. __________________ ^^My #1 Guitar Influence, The Amazing Randy Rhoads.

08-04-2008, 07:42 PM	#3 (permalink)
arcanis494 V.I.P. Member Join Date: Feb 2008 Posts: 2,784 Thanks: 225 Thanked 33 Times in 8 Posts	Re: Randy Rhoads Nailed right there!: YouTube - Doug Aldrich demostration with Marshall 1959RR @ NAMM '08 Sounds like a ton of bass dialed in. I really like Randy's tone and playing! Good luck on finding your tone! __________________

08-05-2008, 08:20 AM	#9 (permalink)
Splattle101 V.I.P. Member Join Date: May 2008 Location: Australia Posts: 3,927 Thanks: 27 Thanked 159 Times in 22 Posts	Re: Randy Rhoads I had a quick look at the NAMM vid, and to get anywhere near that sound you will need a closed cabinet. A 4 x 12, or something similar. A bit like your Valvestate head and cab, really. No open-backed combo by itself will quite nail it. You might get it with a Mesa and an extension cab, for example, but to get his bass response at volume you need a closed cab. As far as gain is concerned, your preamp and Guvnor should do it. You will then need to tweak your EQ and and be ready to ride your volume control. cheers, Splat __________________ *...A tasty world...a very* tasty world...**

08-07-2008, 03:29 PM	#11 (permalink)
Dave67 Senior Member Join Date: Jul 2007 Location: Maryland Posts: 372 Thanks: 0 Thanked 1 Time in 1 Post	Re: Randy Rhoads Randy Rhoads Equipment A full list of randys gear.

Today
Les Paul	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on My Les Paul Forums

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Randy Rhoads fans?...	tiedstick	The Squawk Box	53	07-22-2009 08:49 AM
Randy Rhoads tone	shotgunlew	Tonefreaks	31	04-29-2009 07:34 AM
Randy Rhoads	Termanator7	The Cellar	14	06-09-2008 03:33 PM
Randy Rhoads Lesson Plan!	El Toro	Guitar Lessons	0	04-11-2008 11:39 PM
Randy Rhoads Fans	ace924	Tonefreaks	2	01-27-2008 02:48 AM