MyLesPaul.com
Homepage - Sponsors - Subscription - Auctions - Advertise - Spy  
Go Back   MyLesPaul.com > Music Gear > Tonefreaks > Pickups
MLP Meet 2014 LIKE MyLesPaul on Facebook FOLLOW MyLesPaul on Twitter
  
Like Tree1Likes
  • 1 Post By scottosan

Reply
LinkBack Thread Tools Display Modes
Unread 02-20-2010, 02:18 PM   #1 (permalink)
Senior Member
 
scottosan's Avatar
 
Join Date: Dec 2009
Posts: 104
Thanks: 0
Thanked 8 Times in 3 Posts
Long review of my custom wound Zhangbucker pickups

I hadn't even heard of Zhangbucker pickups until I was in the market for a 59 reissue. I friend of mine, whom I respect his opinion on tone works at a local music store. He told my that he was going to be selling a few guitars for a friend of his, and they were both equipped with Zhang pickups, and that they awesome pickups. He did not have the guitars yet, and in the mean time I need a set of pickups for my R7, so I decided to research Zhangbuckers.

The first thing that intrigued me was that although he had different models, he didn't rely on the typical "choose your pickup from a menu" philosophy. When I emailed Dave, immediately he wanted to know what type of music I was playing, the guitars I was using, amp etc.. He also wanted to know what pickups I was currently using and what I like and disliked about them. We even talked about pot values and cover options, etc. and how it would impact the tone I was going for.

I wanted the bridge to be at least BB2 output level but a little hotter and fat, with sustain and a little bit of attitude that will be used mainly for rock, hard rock (not modern), and not too bright

For the neck tone I wanted something warm but with some chime, but retains clarity end definition. When using neck I am usually in middle and/or neck position for clean stuff, but will occasionally use the neck lead playing moderate to high gain.

Dave recommended the Brownbucker/Woodbucker Pure Hand wound set. The bridge at 9.2k and the neck at 7.5k, both with roughcast Alnico 2's. I went 2 conductor and RS aged covers.

So, I placed an order. a few weeks later my friend at the music store got in those guitars with the Zhangs he was talking about. One was an R7 with a Pagey set, and the other R9 had a Woodbucker/Hot Brownbucker set. Both of these guitars were smoking and sounded great plugged into any amp in the store. I was so excited and couldn't wait to get the set that I ordered. About 2 weeks later, I was ready to buy an R9. There were about 12 or so used ones locally to choose from. After countless hours and countless days, I couldn’t get over the tone of the R9 Yamano with the Zhangbuckers. I fell in love with the guitar immediately.

Fast Forward, I got the pickups that I originally ordered installed about 2 weeks ago, and all I can say is that Dave nailed it!! He produced exactly what we talked about. I owned and have owned alot of high-end gear and have dealt with my fair share of great gear, but unfortunately I have owned alot of gear that hasn’t lived up to the hype. I can tell you for certain, that these pickups are the real deal! I usually plug straight in to either a Bogner XTC Classic, or a Bogner 20th anniversary Shiva. I also have a handful of modded Marshalls. The bridge pickup sounds fat and clear and retains a noticeable 3 dimensional characteristic even at some pretty high gain levels. The pickup also sounds great with the volume rolled down and doesn't lose alot of highs like many pickups. It was exactly what I was looking for.

Now, on the neck. I usually don’t use the neck alot. Typically just when playing clean passages between higher gain riffs. I have to say there is something really special about the woodbucker in the neck. If you recall, I had a woodbucker in the 59 reissue that I bought. The pickup is leaps and bounds better that than all neck pickups I have tried. It is balanced, warm, chimey and also sound great for all types of music. It doesn't have a hint of muddiness or dominance in a particular frequency. The best I can describe it, is that it "sounds" like the "feels". I tried really hard to get the burstbucker in my Murphy to sound like the woodbucker, but I could not. I thought perhaps pickup height or pole adjustments, but the woodbucker rules supreme.
ledzepp2122 likes this.
__________________
2008 50th Anniversary 1958 Reissue "Washed Cherry" Burst Murphy Aged 12 of 200
2008 1959 Les Paul Reissue Yamano "Ice Tea" Burst
1999 Tom Anderson Cobra "Honey Burst"

2009 Bogner 20th Anniversary Shiva w/matching 2x12
1980 John Suhr Modded Marshall (SE+ pre, Whomp, FX Loop)
1996 Egnater MICA TOL100
1976 JMP 50 Modded by me

Bogner 4x12, Bogner OS 2x12, 77 Marshall 4x12, Soldano 4x12,
scottosan is offline   Reply With Quote
The Following 5 Users Say Thank You to scottosan For This Useful Post:
Alt Today
Les Paul

Beitrag Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on MyLesPaul.com
   
Unread 02-21-2010, 01:27 PM   #2 (permalink)
Senior Member
 
5F6-A's Avatar
 
Join Date: Aug 2007
Location: Sir Titus Salt's Land
Posts: 8,384
Thanks: 409
Thanked 529 Times in 128 Posts
Send a message via Skype™ to 5F6-A
Re: Long review of my custom wound Zhangbucker pickups

thanks for your sincerity and well explained experience.

Hope you enjoy those wonderful pickups for a long.long time.
__________________
Nothing heavier than the Gospel
5F6-A is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 07:29 AM.


Our Network: PRS Guitar Forum | Luthier Forum | SG Guitar Forum | Marshall Amp Forum | Music Gear Forum | 7 String Guitar Forum | Acoustic Guitar Forum

MyLesPaul proudly supports St. Jude Children's Research Hospital

Copyright © 2006-2014, MyLesPaul.com. All Rights Reserved.