KP Willits

I guess you're right about Starbucks. I was in a hurry this morning when making my coffee... I use a stove-top brewer and put the damn thing on High instead of 5... came back 9 minutes later and it had been boiling for probably 4-5 minutes. Tastes just like Starbucks!

Hows it going Sir? Hope all is well with you and yours

Just for fun.
http://www.mylespaul.com/forums/grou...sic-group.html

I like your avatar. Is that an Aikido swordsman or a Samurai swordsman?

I was there from '70 to '73.

G'day,
I just wanted to thank you for the help, I've just bought this guitar and in the process of modding it up, anyway below is what I've done to it so far, and I have to say it sounds sweeeeettttt

Guitar Serial
UC07052694
Unsung China
May 2007
Production Number: 2694

Epiphone Les Paul Standard Plus Top - Heritage Cherry Sunburst

A pair of Bare Knuckle Calibrated "The Mule" Pickups
1 Gotoh Aluminum 'Stop' Tailpiece Nickel, M8 x 1.25
1 Gotoh Tune-o-matic Bridge with Studs/Bushings Nickel
A set of Grover Vintage 135 Series Tuners
1 Tusq Nut
1 Switchcraft 3 way Toggle Switch
1 Switchcraft Input Jack
1 Aged 50s Style Switch Tip
1 Set of aged Gold 50's Top Hat Knob Set
2 500K CTS Short-Shaft SuperPots
2 500K CTS Short-Shaft Audio taper pots
1 Jensen .022. Cap for the Bridge position
1 Jensen .015- Cap for the Neck Position
1 Length vintage-black wire- Used for the grounding in the circuit.
1 4-foot length braided wire- Used for wiring switch.

Hey,
Howzit goin, Its me again, I just recieved my Gotoh Bridge and Tailpiece like the ones you have, I just wanted to know did you use the existing posts or did you put the posts that came with the Tailpiece, also Ive just put in a complete vintage upgrade kit from RSguitarworks, ie Pots, Caps, Wiring, and my knobs seem to sitting a bit high, I was just wondering what Pots and knobs you have on that guitar
thanks

G'day mate,
Thanks for the reply, I went ahead and ordered them today, I live about 8 hours south from Brissie at a place called Coonabarabran on a 3,000acre farm, doubt if ya sis has heard of it :-)
Thanks again mate
Goodvibes

G'day mate,
Sorry for bothering you but you left a reply to me concerning a Gotoh Bridge and Tail, I have a 2007 Epiphone Les Paul Standard Plus Top which I'm wanting to upgrade the Bridge and Tailpiece, and below are the ones I was going to buy for it, you said in your reply to me that these are what you bought for your Epi LP, I was just wanting to make sure that these fitted in without any modification, and will they go straight onto my 2007 Epiphone Les Paul Standard Plus Top

#5740-N Gotoh Aluminum 'Stop' Tailpiece Nickel, M8 x 1.25
#1511-N Gotoh Tune-o-matic Bridge with Studs/Bushings Nickel

Thanks for your time and help
Goodvibes