![]() |
|
|
#1 (permalink) |
|
Senior Member
Join Date: Jul 2008
Location: Dallas, TX
Posts: 2,426
Thanks: 130
Thanked 83 Times in 19 Posts
|
My replacement R8
I don't have the original R8 anymore, GC never could "find" the COA and other paperwork for that guitar. So they said they'd order me one and I could bring mine back and swap it for another one that had all the documentation, problem was they didn't have another one at that time.
Anyway, they first told me they could get the COA from Gibson, don't worry it's just take a few days... then it was a few weeks. Then they said they can't get one at all without sending the guitar back to Gibson but I didn't feel like dealing with that unless they couldn't get me a replacement I liked. I got a call last week and they said it was in so I picked it up and while the top isn't as figured as the first one, it sounds and plays every bit as good and the edge binding is clear with no red bleeding which the first one had but I thought I was OK with it. So now I finally have a new R8 with all the paperwork and nice clear bindings and a decent backside too. Here's a few pics I shot today outside. ![]() ![]() ![]()
|
|
|
|
|
|
|
|
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Les Paul Forums |
|
|
|
#3 (permalink) |
|
Bartlett Retrospec Member
![]() Join Date: Feb 2008
Posts: 9,349
Thanks: 638
Thanked 672 Times in 76 Posts
|
Re: My replacement R8
I never saw the first one, but that is one hot guitar!
(Is it normal to G.A.S. for a R8 when you already have one? )
__________________
Tim. Future Bartlett Retrospec winner!! |
|
|
|
|
|
#6 (permalink) |
|
Senior Member
|
Re: My replacement R8
Make sure it doesn't fall into the pool.
Is that a Gloss top?
__________________
Guitars
Gibson Les Paul '58 Reissue (Cherry) Fender MIM Telecaster (Black) Epiphone Les Paul Standard (Cherry) Danelectro DC-59 Reissue (Black) Martin 000-16GT Amps Orange Rocker 30 Head Orange PPC212 Open Back Cab Dr. Z Stangray Head Dr. Z 2x12 Open Back Cab w/ Alnico Blues Marshall MG50DFX 50W Effects BB Preamp Analogman Sunface (MKII Fuzz) VOX Wah |
|
|
|
|
|
#11 (permalink) |
|
Senior Member
Join Date: Nov 2007
Posts: 176
Thanks: 20
Thanked 0 Times in 0 Posts
|
Hi there...
wow... stumming... looks killer... ![]() ...but I doubt that you can avoid bleeding when you play it regulary... and what is bad with the bleeding?... I learned here and elsewhere that even the original old ones did it... Congrats to this wonderful (and obviously sounding) guitar... ![]() PIT...
__________________
the hunt for the magic tone... always and everywhere... My Homepage ~ My YouTube ~ My Facebook |
|
|
|
|
|
#13 (permalink) |
|
Senior Member
Join Date: Jul 2008
Location: Dallas, TX
Posts: 2,426
Thanks: 130
Thanked 83 Times in 19 Posts
|
Re: My replacement R8
Thanks guys, yes it's a nice top and back. Plays well, man you just gotta love that PLEKK machine. The action and innotation is spot on with 0.010's.
The finish is VOS, not gloss. I just buffed lightly the body with some guitar polish and buffed the chrome to get that smudgy VOS crap off it. I left the pups covers (nickel plated) unpolished, it looks cool like that to me. Having a good camera helps too. I shoot with a Canon EOS 30D DSLR with some nice Canon lenses. Here's a full body shot: ![]() Here's a close up of the left top showing nice symmetrical grain and figure. ![]() This finish seems a little brighter, maybe more yellow in the center than the first one. I like it! |
|
|
|
|
|
#14 (permalink) |
|
Senior Member
Join Date: May 2008
Location: New Yawk Sitay
Posts: 858
Thanks: 9
Thanked 6 Times in 3 Posts
|
Re: My replacement R8
I was about to say that, but my post crapped out: I like the grain on the edges as it seems to follow the curve of the body and is symmetrical.
|
|
|
|
|
|
#17 (permalink) |
|
Senior Member
Join Date: Jul 2008
Location: Australia
Posts: 2,207
Thanks: 5
Thanked 5 Times in 4 Posts
|
Re: My replacement R8
Is that not the one on the towl you have in your avatar? Because the one your posting now looks better.
__________________
"Bursting with a Vintage 07 Standard!"
|
|
|
|
|
|
#18 (permalink) |
|
V.I.P. Member
![]() Join Date: Jul 2007
Location: Montana
Posts: 29,930
Thanks: 1,212
Thanked 419 Times in 83 Posts
|
Re: My replacement R8
I like the left side figure. Congrats on another beauty!
The new COA's are nice - I like that they come in a little book that fits in the case. |
|
|
|
|
|
#19 (permalink) | |
|
Senior Member
Join Date: Apr 2008
Posts: 235
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: My replacement R8
Quote:
|
|
|
|
|
|
|
#21 (permalink) | |
|
Senior Member
Join Date: Jul 2008
Location: Dallas, TX
Posts: 2,426
Thanks: 130
Thanked 83 Times in 19 Posts
|
Re: My replacement R8
Quote:
let me post two of them together here for comparison: My original R8 that is on my avatar: ![]() The new R8:
|
|
|
|
|
|
|
#24 (permalink) |
|
Senior Member
Join Date: Nov 2007
Posts: 176
Thanks: 20
Thanked 0 Times in 0 Posts
|
...ah I remember the other one... that was this lovely pic with waggon-wheel on the wall, wasn't it...
![]() I agree with the others the new one is even better looking... ![]() PIT...
__________________
the hunt for the magic tone... always and everywhere... My Homepage ~ My YouTube ~ My Facebook |
|
|
|
|
|
#27 (permalink) |
|
Senior Member
Join Date: Jul 2008
Location: Dallas, TX
Posts: 2,426
Thanks: 130
Thanked 83 Times in 19 Posts
|
Re: My replacement R8
Yes, that one with the Les Paul and wagon wheel leaning against the aged brick with some shadows around the edge is a sweet pic. I gotta get just the right lighting to recapture composition with the new guitar so for now here's another pic of the new R8 I had done with the other one, think this one does look better than the first too.
Here's this weeks desktop photo, the fretboard on this one is really dark, almost like my custom w/ebony:
|
|
|
|
|
|
#29 (permalink) |
|
Senior Member
Join Date: Jul 2008
Location: Dallas, TX
Posts: 2,426
Thanks: 130
Thanked 83 Times in 19 Posts
|
Re: My replacement R8
That is correct... the COA stamped from Gibson is part of the Gibson Historic package and I did not get a complete package as promised by GC, I didn't want to send it back to Gibson for 3 weeks to re-certify it and issue a new certificate, so I had GC get me another one. If that seems funny I'd hate to see what makes you angry...
|
|
|
|
|
|
#30 (permalink) | |
|
Senior Member
Join Date: Mar 2007
Location: Albany, NY
Posts: 1,177
Thanks: 0
Thanked 5 Times in 5 Posts
|
Re: My replacement R8
Quote:
|
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|