Problems with a Gibson Chainsaw Case.

Last · 06-27-2009, 05:02 PM

Just received a Gibson Chainsaw Case & it was listed as fitting the Les Paul. Thing is it don't fit my Traditional nor my Historics.

Fits an SG perfectly as well as the Les Paul Junior I've got.

Question:

Did Gibson make different sized Chainsaw Cases? I thought they were all the same?

Thanks!

edit: This one is the 2nd edition with the metal latches. Very nice case actually, it just won't close without using some force when placing a Les Paul in it.

Boleskinehouse · 06-27-2009, 05:05 PM

They must have made different ones because all my LPs fit in mine with no problem.

Last · 06-27-2009, 05:13 PM

Yeah, kinda pisses me off as the seller listed it as fitting an LP no problem but wasn't sure if an SG would fit.

Ha! It's the other way around!

Mercutio · 06-27-2009, 05:20 PM

does your les paul look like this?

Last · 06-27-2009, 05:44 PM

Case in point.

Fits fine as long as I don't try & close it.

circusboy28 · 06-27-2009, 06:25 PM

I think that's an old SG case

Last · 06-27-2009, 06:28 PM

Well it certainly makes sense.

Wish I'd known but I'm sure I'll find a use for it as it does fit not only an SG but any uncarved LP such as the Juniors & Specials.

Hmmmm.... excellent reason to shop a new guitar that only comes with a Gig Bag such as the Satin Juniors?

VastHorizon · 06-27-2009, 06:29 PM

Same problem I encountered, only I had a Gen 1 case. Turns out, the dimensions of the specs of the past LP's were different than today's so the foam at the heel was not yet really pushed down. It's alright now. Stuck it in for a week.

VastHorizon · 06-27-2009, 06:31 PM

If I remember correctly, Gen 1 cases were only made for LP's so it only had a single spec. Gen 2 cases were made separately; SG's and LP's.

Boleskinehouse · 06-27-2009, 07:07 PM

Quote:

Originally Posted by Last

Case in point.

Fits fine as long as I don't try & close it.

That's a gen. 3 actually.

Last · 06-27-2009, 07:09 PM

Quote:

Originally Posted by Boleskinehouse

That's a gen. 3 actually.

Really?

Thanks for the info. It's in excellent condition so it makes sense.

Satch0922 · 06-27-2009, 07:10 PM

yeah that is not for the LP. I have two chainsaw cases, one houses my 84 Studio and the other my 86 Custom. Both fit perfectly.

Boleskinehouse · 06-27-2009, 07:13 PM

Quote:

Originally Posted by Last

Really?

Thanks for the info. It's in excellent condition so it makes sense.

And it does look like it should be for an SG.. My chainsaw doesn't look like that at all on the inside.

Last · 06-27-2009, 07:21 PM

Yeah, I'm finally coming to terms that it's not going to work as advertised.

It does work great for an SG or a LP JR. Actually any LP without the carved top.

Damn. I really wanted one for one of my Les Pauls.

Actually considered just squooshing it down & hoping for the best in a week or two but really dont' want to put that kind of stress on any of my carved top guitars.

Thank you Boles.

loneguitar · 06-27-2009, 10:16 PM

The form fit is all wrong, shouldn't it mold to the LP body, not an LP case as already stated.

treatb · 06-28-2009, 03:14 AM

looks sg, to mee

atkinsg · 06-28-2009, 05:41 PM

Hey anyone know where I can buy the latch for one of these cases.
mine is the same as the one here (gen 3) only mine fits my 87 les paul (original)

thanks in advance

'86 · 06-30-2009, 06:27 AM

Ok, so you'll have to buy an SG for the case now.

MrWrong · 06-30-2009, 07:30 AM

Quote:

Originally Posted by '86

Ok, so you'll have to buy an SG for the case now.

That seems like the best solution.

06-27-2009, 05:02 PM	#1 (permalink)
Last Master Crafter Join Date: Jul 2008 Location: St. Louis, MO. USA Posts: 3,513 Thanks: 176 Thanked 53 Times in 27 Posts	Problems with a Gibson Chainsaw Case. Just received a Gibson Chainsaw Case & it was listed as fitting the Les Paul. Thing is it don't fit my Traditional nor my Historics. Fits an SG perfectly as well as the Les Paul Junior I've got. Question: Did Gibson make different sized Chainsaw Cases? I thought they were all the same? Thanks! edit: This one is the 2nd edition with the metal latches. Very nice case actually, it just won't close without using some force when placing a Les Paul in it.

06-27-2009, 05:05 PM	#2 (permalink)
Boleskinehouse V.I.P. Member Join Date: Jan 2008 Location: Next to Raleighwood Posts: 20,804 Thanks: 73 Thanked 584 Times in 104 Posts	Re: Problems with a Gibson Chainsaw Case. They must have made different ones because all my LPs fit in mine with no problem. __________________

06-27-2009, 05:13 PM	#3 (permalink)
Last Master Crafter Join Date: Jul 2008 Location: St. Louis, MO. USA Posts: 3,513 Thanks: 176 Thanked 53 Times in 27 Posts	Re: Problems with a Gibson Chainsaw Case. Yeah, kinda pisses me off as the seller listed it as fitting an LP no problem but wasn't sure if an SG would fit. Ha! It's the other way around!

06-27-2009, 05:20 PM	#4 (permalink)
Mercutio Senior Member Join Date: Feb 2008 Location: Washington, DC Posts: 668 Thanks: 3 Thanked 3 Times in 3 Posts	Re: Problems with a Gibson Chainsaw Case. does your les paul look like this? __________________ 2007 Gibson Les Paul Custom - Alpine White 2000 Gibson Les Paul Classic w/Seymour Duncan Alnico II's - Honey Burst 2004 Gibson SG Standard - Ebony 2005 Gibson Songwriter Deluxe - Natural 1996 Fender American Standard Telecaster - Surf Green Live Amp: Marshall JVM 210H/JCM 2000 DSL 50 and 1960A Lead Cab Home: Mesa/Boogie F50 1x12 combo

06-27-2009, 05:44 PM	#5 (permalink)
Last Master Crafter Join Date: Jul 2008 Location: St. Louis, MO. USA Posts: 3,513 Thanks: 176 Thanked 53 Times in 27 Posts	Re: Problems with a Gibson Chainsaw Case. Case in point. Fits fine as long as I don't try & close it.

Today
Les Paul	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on My Les Paul Forums

06-27-2009, 06:25 PM	#6 (permalink)
circusboy28 Senior Member Join Date: Dec 2008 Location: Petersham in sunny Sydney Posts: 3,185 Thanks: 71 Thanked 9 Times in 3 Posts	Re: Problems with a Gibson Chainsaw Case. I think that's an old SG case

06-27-2009, 06:28 PM	#7 (permalink)
Last Master Crafter Join Date: Jul 2008 Location: St. Louis, MO. USA Posts: 3,513 Thanks: 176 Thanked 53 Times in 27 Posts	Re: Problems with a Gibson Chainsaw Case. Well it certainly makes sense. Wish I'd known but I'm sure I'll find a use for it as it does fit not only an SG but any uncarved LP such as the Juniors & Specials. Hmmmm.... excellent reason to shop a new guitar that only comes with a Gig Bag such as the Satin Juniors?

06-27-2009, 06:29 PM	#8 (permalink)
VastHorizon Senior Member Join Date: Sep 2008 Posts: 5,042 Thanks: 39 Thanked 111 Times in 30 Posts	Re: Problems with a Gibson Chainsaw Case. Same problem I encountered, only I had a Gen 1 case. Turns out, the dimensions of the specs of the past LP's were different than today's so the foam at the heel was not yet really pushed down. It's alright now. Stuck it in for a week.

06-27-2009, 06:31 PM	#9 (permalink)
VastHorizon Senior Member Join Date: Sep 2008 Posts: 5,042 Thanks: 39 Thanked 111 Times in 30 Posts	Re: Problems with a Gibson Chainsaw Case. If I remember correctly, Gen 1 cases were only made for LP's so it only had a single spec. Gen 2 cases were made separately; SG's and LP's.

06-27-2009, 07:10 PM	#12 (permalink)
Satch0922 Senior Member Join Date: Sep 2007 Posts: 1,565 Thanks: 4 Thanked 16 Times in 11 Posts	Re: Problems with a Gibson Chainsaw Case. yeah that is not for the LP. I have two chainsaw cases, one houses my 84 Studio and the other my 86 Custom. Both fit perfectly. __________________ http://www.myspace.com/satch0922

06-27-2009, 07:21 PM	#14 (permalink)
Last Master Crafter Join Date: Jul 2008 Location: St. Louis, MO. USA Posts: 3,513 Thanks: 176 Thanked 53 Times in 27 Posts	Re: Problems with a Gibson Chainsaw Case. Yeah, I'm finally coming to terms that it's not going to work as advertised. It does work great for an SG or a LP JR. Actually any LP without the carved top. Damn. I really wanted one for one of my Les Pauls. Actually considered just squooshing it down & hoping for the best in a week or two but really dont' want to put that kind of stress on any of my carved top guitars. Thank you Boles.

06-27-2009, 10:16 PM	#15 (permalink)
loneguitar Senior Member Join Date: Aug 2007 Location: Memphis Posts: 1,625 Thanks: 0 Thanked 1 Time in 1 Post	Re: Problems with a Gibson Chainsaw Case. The form fit is all wrong, shouldn't it mold to the LP body, not an LP case as already stated. __________________ " Without a song The road would never bend, Without a song, A man ain't got a friend, Without a song, The day would never end Without a song So I keep singing a song "

06-28-2009, 03:14 AM	#16 (permalink)
treatb Senior Member Join Date: Apr 2009 Location: nebraska Posts: 328 Thanks: 0 Thanked 6 Times in 2 Posts	Re: Problems with a Gibson Chainsaw Case. looks sg, to mee

06-28-2009, 05:41 PM	#17 (permalink)
atkinsg Member Join Date: Dec 2007 Posts: 40 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Problems with a Gibson Chainsaw Case. Hey anyone know where I can buy the latch for one of these cases. mine is the same as the one here (gen 3) only mine fits my 87 les paul (original) thanks in advance __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chainsaw Sculpting	The_Sentry	The Backstage	8	04-17-2009 01:12 PM
Chainsaw guitar case	rhys1157	Member Classifieds	9	01-27-2009 07:32 PM
Problems with my new Epiphone les paul studio - worn cherry (need advice for problems	ELPSTUDIO	Epiphone Les Pauls	17	01-04-2009 02:30 AM
WTB Gibson Protector (chainsaw) cases	moff40	Member Classifieds	11	12-25-2008 01:53 PM
FS :: 70's Gibson Protector Chainsaw Case	rubiconrider	Member Classifieds	6	12-14-2008 03:56 PM

06-30-2009, 06:27 AM	#18 (permalink)
'86 Senior Member Join Date: Sep 2008 Location: Dublin, Ireland Posts: 124 Thanks: 1 Thanked 0 Times in 0 Posts	Re: Problems with a Gibson Chainsaw Case. Ok, so you'll have to buy an SG for the case now. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode