The Guitar Tone Shop

***FLICKOFLASH*** · 05-12-2008, 10:50 PM

Scotty Huffman

eBay Store - The Guitar Tone Shop: KlusonTuners, Nitrocellulose Lacquer, GUITAR CASES

Here at The Guitar Tone Shop we believe in honesty in what we sell.My name is Scotty Huffman and I am the owner and oversee all operations here.

They are a small town shop with family values and just like anybody else we are trying to make a living.I do not believe in selling junk as many people do on eBay.All of our guitars are top notch and professionally set up by me before being shipped out.Most people are just buying and selling guitars without even knowing if they play right and some never even see the guitars they sell and that is why their shipping times are so long.I try to get everything I sell out within three business days and I handle and setup every guitar.

eBay Store - The Guitar Tone Shop: KlusonTuners, Nitrocellulose Lacquer, GUITAR CASES

Scotty is now offering Fender licensed necks with tons of custom options. Choose the neck Tele or Strat and I will finish it in nitrocellulose gloss lacquer with a vintage tint .Just remember Nitro lacquer takes some curing time so this is about a 15 to 20 working day process. A super thin satin nitro finish will be about half that time. These are a little more expensive than the allparts necks I offer but you get a lot more.
These necks come with some standard options and with some custom options you can choose yourself. Just look over the custom options and decide what you want and be sure to Contact Me so I know exactly what you want.
Standard Options
2-3/16" heel width
Right handed
21 Fret
Truss rod adjust at heel (vintage)
Light rolled fretboard edges
Vintage 12th fret wide dot spacing
Choose From The Custom Options Below
Strat or Tele
All Maple or Maple/Rosewood
Width at nut 1-5/8 or 1-11/16"
Fretboard radius: 7.25",9.5,10,12,15,16
Dot inlay and side markers: white, black or imitation clay
Fret size: vintage 6230 .080 x .043" tall
Med 6105 .095W x .047 Tall
Med. Tall 9055 .090 x .055 tall
Med. Jumbo 6150 .104 x .047 Tall
SRV Jumbo 6100 .110 x .055 Tall
Super Jumbo 6000 .118 x .058 Tall
Tuner hole size: Vintage Kluson 11/32" or 10mm gotoh, sperzel,schaller
Nut Slot .125" curved bottom or flat bottom
Neck Profile
Thin C .790 at first fret .890 at 12th
Med. C .830 to .920
Chunky C .900 to .990
Fat C 1" to 1"
Chunky U .900 to .900
Boat V .950 to .950
Clapton V .840 to .900
SRV Asymmetrical .840 to .970
Thin D .750 to .810
Fat D .900 to 1"
Super thin Nitro satin Finish with vintage tint. About a 2 week finish time
Gloss Nitro finish with vintage tint 15 to 20 working days

You can add options such as relicing, tuners,tusq or bone nut and string tree just Contact Me

Scotty also offer fret level,crown and dress service in my store.Custom bodies also offered.Visit My eBay Store

Please alow 15 to 20 working days to get this out because nitro lacquer takes a little time.

If you are looking for that custom strat or tele and a $3000 custom shop model is out of the question then build your own for less.Remember that good wood is good wood.AAA flame maple is AAA flame maple no matter where you get it or any other grade wood for that matter.These are beautiful necks on their own so just imagine if you add your own personal touches to them

.

Fender Stratocaster/Telecaster Neck Licensed By Fender - eBay (item 300223391479 end time May-18-08 16:57:11 PDT)

eBay - Reviews & Guides by scottyfathead

***FLICKOFLASH*** · 05-24-2008, 10:37 PM

scottystrathead · 03-10-2009, 12:06 AM

If I can help you guys with any projects let me know.

Scotty

Jason · 03-10-2009, 12:23 AM

Looks like nice stuff, Scotty. Oddly enough I've been mulling over the possibility of a partsocaster for the last week or so. I'll get ahold of you when I've got the money for it.

***FLICKOFLASH*** · 03-15-2009, 01:22 AM

YouTube - Walnut Stratocaster.AVI

***FLICKOFLASH*** · 03-16-2009, 08:16 PM

Fender Stratocaster with Refinished SRV Body - eBay (item 300301016638 end time Apr-15-09 14:13:01 PDT)

Auctiva Image Hosting

Jason · 03-16-2009, 08:30 PM

Wow, nice deal compared to an American Standard.

***FLICKOFLASH*** · 03-16-2009, 08:33 PM

Quote:

Originally Posted by Jason

Wow, nice deal compared to an American Standard.

Dakota Red,All Nitro
http://cgi.ebay.com/ws/eBayISAPI.dll...m=300301016638

kernelofwisdom · 03-18-2009, 08:49 AM

I went looking for that cover for the neck/plate joint but didnt see it sold separately. i'd buy that!

***FLICKOFLASH*** · 04-04-2009, 02:34 AM

Scotty can hook you up with your parts needs as well. I got a baritone strat neck on the way. He can also finish you a guitar in Real Nitro not plastic just pick your color the hard part.

scottystrathead · 04-07-2009, 07:28 PM

Just click on Maxx the pitbull to see a slide show.

Feel free to contact me about anything you might need.Necks,bodies,Fender and Gibson parts or accessories.
eBay Store - The Guitar Tone Shop: KlusonTuners, Nitrocellulose Lacquer, GUITAR CASES

Iceman0124 · 04-07-2009, 07:38 PM

Do you deal with Gretsch parts? In patricular I'm looking for a chrome V cut B6 tailpiece and a Chet Atkins wire Bigsby handle.

scottystrathead · 04-07-2009, 07:53 PM

I can get a B6 like this

Iceman0124 · 04-07-2009, 09:16 PM

Got one like that, looking for like

Gretsch Bigsby Tailpiece*B6C

and a chet arm.

scottystrathead · 04-07-2009, 09:21 PM

Dont have that.

G-Minor · 04-08-2009, 12:57 AM

how much for the strat neck

scottystrathead · 04-08-2009, 10:07 AM

All are finished to order.
Allparts necks are $195
Musikraft necks are $275
Prices are for the neck and finish.

05-12-2008, 10:50 PM	#1 (permalink)
*FLICKOFLASH* Super Moderator Join Date: Mar 2007 Location: Hagerstown,MD USA Posts: 14,369 Thanks: 333 Thanked 530 Times in 113 Posts	The Guitar Tone Shop Scotty Huffman eBay Store - The Guitar Tone Shop: KlusonTuners, Nitrocellulose Lacquer, GUITAR CASES Here at The Guitar Tone Shop we believe in honesty in what we sell.My name is Scotty Huffman and I am the owner and oversee all operations here. They are a small town shop with family values and just like anybody else we are trying to make a living.I do not believe in selling junk as many people do on eBay.All of our guitars are top notch and professionally set up by me before being shipped out.Most people are just buying and selling guitars without even knowing if they play right and some never even see the guitars they sell and that is why their shipping times are so long.I try to get everything I sell out within three business days and I handle and setup every guitar. eBay Store - The Guitar Tone Shop: KlusonTuners, Nitrocellulose Lacquer, GUITAR CASES Scotty is now offering Fender licensed necks with tons of custom options. Choose the neck Tele or Strat and I will finish it in nitrocellulose gloss lacquer with a vintage tint .Just remember Nitro lacquer takes some curing time so this is about a 15 to 20 working day process. A super thin satin nitro finish will be about half that time. These are a little more expensive than the allparts necks I offer but you get a lot more. These necks come with some standard options and with some custom options you can choose yourself. Just look over the custom options and decide what you want and be sure to Contact Me so I know exactly what you want. Standard Options 2-3/16" heel width Right handed 21 Fret Truss rod adjust at heel (vintage) Light rolled fretboard edges Vintage 12th fret wide dot spacing Choose From The Custom Options Below Strat or Tele All Maple or Maple/Rosewood Width at nut 1-5/8 or 1-11/16" Fretboard radius: 7.25",9.5,10,12,15,16 Dot inlay and side markers: white, black or imitation clay Fret size: vintage 6230 .080 x .043" tall Med 6105 .095W x .047 Tall Med. Tall 9055 .090 x .055 tall Med. Jumbo 6150 .104 x .047 Tall SRV Jumbo 6100 .110 x .055 Tall Super Jumbo 6000 .118 x .058 Tall Tuner hole size: Vintage Kluson 11/32" or 10mm gotoh, sperzel,schaller Nut Slot .125" curved bottom or flat bottom Neck Profile Thin C .790 at first fret .890 at 12th Med. C .830 to .920 Chunky C .900 to .990 Fat C 1" to 1" Chunky U .900 to .900 Boat V .950 to .950 Clapton V .840 to .900 SRV Asymmetrical .840 to .970 Thin D .750 to .810 Fat D .900 to 1" Super thin Nitro satin Finish with vintage tint. About a 2 week finish time Gloss Nitro finish with vintage tint 15 to 20 working days You can add options such as relicing, tuners,tusq or bone nut and string tree just Contact Me Scotty also offer fret level,crown and dress service in my store.Custom bodies also offered.Visit My eBay Store Please alow 15 to 20 working days to get this out because nitro lacquer takes a little time. If you are looking for that custom strat or tele and a $3000 custom shop model is out of the question then build your own for less.Remember that good wood is good wood.AAA flame maple is AAA flame maple no matter where you get it or any other grade wood for that matter.These are beautiful necks on their own so just imagine if you add your own personal touches to them . Fender Stratocaster/Telecaster Neck Licensed By Fender - eBay (item 300223391479 end time May-18-08 16:57:11 PDT) eBay - Reviews & Guides by scottyfathead __________________ http://grou.ps/flickoflash/home

05-24-2008, 10:37 PM	#2 (permalink)
*FLICKOFLASH* Super Moderator Join Date: Mar 2007 Location: Hagerstown,MD USA Posts: 14,369 Thanks: 333 Thanked 530 Times in 113 Posts	Re: The Guitar Tone Shop __________________ http://grou.ps/flickoflash/home

03-10-2009, 12:06 AM	#3 (permalink)
scottystrathead Member Join Date: May 2008 Location: Lancaster,Ky Posts: 58 Thanks: 0 Thanked 4 Times in 1 Post	Re: The Guitar Tone Shop If I can help you guys with any projects let me know. Scotty

03-10-2009, 12:23 AM	#4 (permalink)
Jason Senior Member Join Date: Sep 2008 Location: Oregon Posts: 12,969 Thanks: 84 Thanked 91 Times in 23 Posts	Re: The Guitar Tone Shop Looks like nice stuff, Scotty. Oddly enough I've been mulling over the possibility of a partsocaster for the last week or so. I'll get ahold of you when I've got the money for it.

03-16-2009, 08:16 PM	#6 (permalink)
*FLICKOFLASH* Super Moderator Join Date: Mar 2007 Location: Hagerstown,MD USA Posts: 14,369 Thanks: 333 Thanked 530 Times in 113 Posts	Re: The Guitar Tone Shop Fender Stratocaster with Refinished SRV Body - eBay (item 300301016638 end time Apr-15-09 14:13:01 PDT) Auctiva Image Hosting __________________ http://grou.ps/flickoflash/home Last edited by FLICKOFLASH; 03-16-2009 at 08:49 PM.

Today
Les Paul	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on My Les Paul Forums

03-16-2009, 08:30 PM	#7 (permalink)
Jason Senior Member Join Date: Sep 2008 Location: Oregon Posts: 12,969 Thanks: 84 Thanked 91 Times in 23 Posts	Re: The Guitar Tone Shop Wow, nice deal compared to an American Standard.

03-18-2009, 08:49 AM	#9 (permalink)
kernelofwisdom V.I.P. Member Join Date: Jun 2008 Location: Raleigh, NC Posts: 3,197 Thanks: 77 Thanked 108 Times in 26 Posts	Re: The Guitar Tone Shop I went looking for that cover for the neck/plate joint but didnt see it sold separately. i'd buy that! __________________ The Unbroken Paths of Samantha's Life

04-04-2009, 02:34 AM	#10 (permalink)
*FLICKOFLASH* Super Moderator Join Date: Mar 2007 Location: Hagerstown,MD USA Posts: 14,369 Thanks: 333 Thanked 530 Times in 113 Posts	Re: The Guitar Tone Shop Scotty can hook you up with your parts needs as well. I got a baritone strat neck on the way. He can also finish you a guitar in Real Nitro not plastic just pick your color the hard part. __________________ http://grou.ps/flickoflash/home

04-07-2009, 07:28 PM	#11 (permalink)
scottystrathead Member Join Date: May 2008 Location: Lancaster,Ky Posts: 58 Thanks: 0 Thanked 4 Times in 1 Post	The Fender Possibilities Just click on Maxx the pitbull to see a slide show. Feel free to contact me about anything you might need.Necks,bodies,Fender and Gibson parts or accessories. eBay Store - The Guitar Tone Shop: KlusonTuners, Nitrocellulose Lacquer, GUITAR CASES

04-07-2009, 07:38 PM	#12 (permalink)
Iceman0124 Senior Member Join Date: Jun 2007 Location: Chattanooga TN Posts: 1,533 Thanks: 39 Thanked 12 Times in 4 Posts	Re: The Fender Possibilities Do you deal with Gretsch parts? In patricular I'm looking for a chrome V cut B6 tailpiece and a Chet Atkins wire Bigsby handle.

04-07-2009, 07:53 PM	#13 (permalink)
scottystrathead Member Join Date: May 2008 Location: Lancaster,Ky Posts: 58 Thanks: 0 Thanked 4 Times in 1 Post	Re: The Fender Possibilities I can get a B6 like this

04-07-2009, 09:16 PM	#14 (permalink)
Iceman0124 Senior Member Join Date: Jun 2007 Location: Chattanooga TN Posts: 1,533 Thanks: 39 Thanked 12 Times in 4 Posts	Re: The Fender Possibilities Got one like that, looking for like Gretsch Bigsby Tailpiece*B6C and a chet arm.

04-07-2009, 09:21 PM	#15 (permalink)
scottystrathead Member Join Date: May 2008 Location: Lancaster,Ky Posts: 58 Thanks: 0 Thanked 4 Times in 1 Post	Re: The Fender Possibilities Dont have that.

04-08-2009, 12:57 AM	#16 (permalink)
G-Minor Member Join Date: Jan 2008 Location: In a pu cavity Posts: 991 Thanks: 0 Thanked 4 Times in 3 Posts	Re: The Fender Possibilities how much for the strat neck __________________ David Taylor. Guitars 2007 WORN CHERRY GIBSON FLYING V (JENNY) 1996 ICE BLUE METTALIC MEXICAN STRAT (RUDY) 1994 EPIPHONE BIRDSEYE LES PAUL (FUGLY) 2005 TRANS BLACK EPIPHONE LES PAUL 3 SQUIER STRATS THAT IM ATTEMPTING TO SELL. AMPS 1990'S MARSHALL VALVESTATE 102R 2x12'S 2002 MARSHALL AVT 150H WITH A 1960A CAB

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who's Got the Best Guitar Tone ???	BOBBO	Tonefreaks	114	10-25-2009 10:35 AM
guitar shape and tone: nodes????	st.bede	Tonefreaks	6	07-21-2009 02:09 PM
Rist guitar shop in a video	Roman Rist	The Backstage	11	02-28-2008 02:40 PM
Caps wired between tone center terminal and tone pot body	whywhyzed	Tonefreaks	8	02-04-2008 04:44 AM
A Custom Shop Guitar for Scratch!	Led Zep Fan	Other Gibsons	3	01-10-2008 01:27 AM

04-08-2009, 10:07 AM	#17 (permalink)
scottystrathead Member Join Date: May 2008 Location: Lancaster,Ky Posts: 58 Thanks: 0 Thanked 4 Times in 1 Post	Re: The Guitar Tone Shop All are finished to order. Allparts necks are $195 Musikraft necks are $275 Prices are for the neck and finish.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode