MyLesPaul.com
Homepage - Sponsors - Subscription - Auctions - Advertise - Spy  
Go Back   MyLesPaul.com > The Les Paul > The Custom Shop
LIKE MyLesPaul on Facebook FOLLOW MyLesPaul on Twitter
  
Reply
LinkBack Thread Tools Display Modes
Unread 04-19-2010, 03:15 AM   #1 (permalink)
Junior Member
 
Join Date: Apr 2010
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Thumbs down Repairing tuning peg holes

My current project is an Epiphone LP Special 2. Someone in the past has enlarged the tuning peg holes and made mess of it. The holes are in some cases oval and are of all different sizes. As I see it, the options are:

i. Fill the holes around the edges and then re-drill tidily to the required diameter.

ii. Drill all the holes out to, say, a uniform 12mm and fit a stainless sleeve with a 10.8mm inside diameter

iii. Buy a new neck.

I'm hovering between i and ii and would appreciate some guidance.
P1425 is offline   Reply With Quote
Alt Today
Les Paul

Beitrag Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on MyLesPaul.com
   
Unread 04-23-2010, 12:43 PM   #2 (permalink)
Senior Member
 
Paragon's Avatar
 
Join Date: Apr 2008
Location: SE Michigan
Posts: 1,182
Thanks: 5
Thanked 0 Times in 0 Posts
Re: Repairing tuning peg holes

It might be hard to drill through an oval hole without a drill press. Basic thing would be to enlarge the hole to a standard dowel size, glue a plug in, sand, drill new hole, refinish.. or not.
__________________
Memphis "The Paul" Mightymites
Partscaster Lace Sensor Gold
Vox AD60VTX VC12 Crybaby Classic

Paragon is offline   Reply With Quote
Unread 04-26-2010, 11:21 AM   #3 (permalink)
Senior Member
 
Join Date: Jul 2009
Posts: 144
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Repairing tuning peg holes

This is a common repair on violins. The method there is to ream the hole with a tapered reamer and plug it with a tapered plug or spiral bushing. Might be a bit expensive to buy those tools for a one time job.
A drill press would be a requirement for drilling out the old holes. If you do not use one you will crack the headstock. Even with one, if you are not careful, you might crack it.
neil_004 is offline   Reply With Quote
Unread 04-29-2010, 07:31 AM   #4 (permalink)
Senior Member
 
H.E.L.Shane's Avatar
 
Join Date: Jun 2009
Location: Mifflintown, PA
Posts: 6,225
Thanks: 11
Thanked 244 Times in 77 Posts
Re: Repairing tuning peg holes

Ok..... being that this is an eppi and a bolt on....

I'll commit sacriledge and tell ya what you can do to "get it by"

Rough up the holes with some 60 grit, then, gob e'm up around the edges with JB weld. Don;t use regular epoxy and don't use the 5 minute JB...

let that sit a day, then you can re-drill the holes.

you can prime and paint right over the JB if you desire, or leave it if your washers cover it up.

I would not do this on a customers guitar, i figure if they are paying me, the job needs to be done right.. however, when local kids drag something into my shop and beg for help... i have a few tricks up my sleeve!

the correct way is to use a drill press, drill the hole to a dowel size, insert the dowel, and re-drill, re-finish!!
__________________
___________________________


Quote:
Originally Posted by Bobby "The Brain" Heenan
"I've been hit with a metal chair so many times that the top of my head smell like ass!"
H.E.L.Shane is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 04:45 AM.


Our Network: PRS Guitar Forum | Luthier Forum | SG Guitar Forum | Marshall Amp Forum | Music Gear Forum | 7 String Guitar Forum | Acoustic Guitar Forum

MyLesPaul proudly supports St. Jude Children's Research Hospital

Copyright © 2006-2014, MyLesPaul.com. All Rights Reserved.