Jonesyblues Custom Shop & ToneMojo.com

[jonesy]

Here is a Better Pic of the 50's Style Wiring Harness



THIS 50's WIRING IS SOLD THANKS
8.20.08

[jonesy]

THIS HARNESS IS STILL AVAILABLE: 1 MEG DIMARZIO POTS IN VOLUMES, GIVES YOU THAT KILLER TONE WITHOUT THE MUD. 500K CTS IN TONE, A PAIR OF MY PREMIUM VOLUME BLEED KITS. BLACK & RED VINTAGE CLOTH WIRE. THIS RIG IS FOR SUPER HOT OVERWOUND HUMBUCKERS OVER 12-15 OHMS ON UP! WIDE OPEN OVER THE TOP TONE, WITH MODERN WIRING CONFIGURATION TO KEEP IT WARM WITH AN EDGE. A PAIR OF .022 SPRAGUE HYREL VITAMIN Q'S FOR GREAT TONE!



THIS RIG WILL NOT FIT THICK TOP LES PAULS, LIKE THE LES PAUL CUSTOM...IT WILL FIT THE CLASSICS, MOST STANDARDS, MOST EPI'S AND A LOT OF LP VARIANTS
THIS 1 MEG HARNESS IS BUILT AND READY TO SHIP OUT $80.00 USA
CALL 1-574-806-4118 OR YOU CAN EMAIL ME AT jonesyblues@yahoo.com Thanks & Peace, jonesy

[jonesy]

I just got in 60 more of the Vitamin Q's in .022 and .015, plenty in stock...mix & match for any MLPF members, the .015's work great on the neck pickup, not to dark... just send me an email or PM here at the MLPF and I would be glad to hook you up with what ever you need. Plenty of Bleed kits in stock as well. I also have these Q's in Relic'd Paper and Wax version if you have a VOS or reissue they look great. Good until supply lasts!!

[jonesy]

Here is a pic of my version of the early 50's paper and wax , I love the Vintage Mojo and Killer Tone these Relic'd Caps give you!

[jonesy]

Order a pair of These Relic'd PIO Caps and get a FREE pair of my Vintage Volume Bleed Kits! Good for MLPF members Only...

[dogbone94]

trade for either a dennis george 'distorted mind blues' or a jeckyl and hyde[silver version] and a chrome tailpeice... dave

[jonesy]

Sure Bro I am always up for some trading, any way you could give me a call might be easier to work out the details on the pedals etc? 1-574-806-4118

Thanks, jonesy

[dogbone94]

good talking to you...

[jonesy]

Originally Posted by dogbone94

good talking to you...

Yeah for sure, Thanks for taking time to call I appreciate that...

Peace, jonesy

[jonesy]

Dog bone has first dibs on this harness and he is going to get back to me tomorrow after he checks thickness of LP top to see if this rig will fit in his guitar.

[Vintage_Burster]

Are these the ones that everyone suggests? The exact Q's that everyone raves above?

[jonesy]

Originally Posted by Vintage_Burster

Are these the ones that everyone suggests? The exact Q's that everyone raves above?

The .015's are Marked Sprague .015-100VDC Vitamin Q's, the .022's are marked Sprague HYREL .022-200VDC, they are the 5% Mil Spec version of the Q's.
These are pretty much the Bench Mark for PIO caps as far as Q's go I suppose...??

Thanks, jonesy

[wantsa58]

Wow, like the look of that second harness.. Im pretty sure that its gone by now but would you be interested in taking a pedal trade in with some "boot" on top for a "metal" style harness. I think it would be good for my future JB pup.. think its 15 ohms.

If you are interested I have a like new Boss metal core pedal that i could send you along with some extra cash. I'd really like one of those, but my damn tuition is killing me. lol

[Big_dawg]

are these one offs or are they going into 'production'..??

[jonesy]

Originally Posted by Big_dawg

are these one offs or are they going into 'production'..??

I am just a one man job shop, so basically everything is a custom order.
These were both a couple of LP rigs that I built and tossed on here for you guys.
Right now my only two "production rigs" are the Jimmy Page with 4 push pulls & 21 tones, and the Brent Mason Blender Nashville Tele rig.
Anything else is pretty much built per order as customer requests.

If you have something in mind let me know, I would be glad to build/design you what ever you need bro?

Thanks & Peace, jonesy

[jonesy]

Originally Posted by wantsa58

Wow, like the look of that second harness.. Im pretty sure that its gone by now but would you be interested in taking a pedal trade in with some "boot" on top for a "metal" style harness. I think it would be good for my future JB pup.. think its 15 ohms.

If you are interested I have a like new Boss metal core pedal that i could send you along with some extra cash. I'd really like one of those, but my damn tuition is killing me. lol

Well Dog Bone has first dibs on it. He told me he wants it, but he has to measure the thickness of his top to make sure that the shorter shaft Pots will work in his guitar. I will give him another day or two to let me know.

If it isn't going to work out for him, you are next in line if you are interested I can contact you? Or I will put up a Post, stating it is still up for grabs OK?

Thanks, jonesy

[jonesy]

I have been going through this Last Batch of Q's really fast, between your MLPF orders here, my relics and what I need to put back for my own harnesses I am getting Low already
After this weekend I will probably end this offer, so get em while they last!!

Thanks & Peace, jonesy

[drewbertca]

These things are worth it....I went with a .015 to tame the treble roll off and wow....my tone control is much more tapered.....not like an on-off switch anymore

[Texas07R8]

Just sent you an email... I gotta go make some money be back this afternoon!

[jonesy]

Originally Posted by Texas07R8

Just sent you an email... I gotta go make some money be back this afternoon!

Thanks, I will look for that email...
jonesy

[wantsa58]

Thats cool, i'll check back often then.

On a side not i thought that all Gibsons required the use of long shaft pots? Is it just the Customs?

If Dog Bone cant use them, just shoot me a PM.

[jonesy]

Originally Posted by wantsa58

Thats cool, i'll check back often then.

On a side not i thought that all Gibsons required the use of long shaft pots? Is it just the Customs?

If Dog Bone cant use them, just shoot me a PM.

I will Bro, for sure...Dogbone is really busy and have not had time to measure yet.

As far as I know Long-shaft Pots are needed for all LP Customs, Supremes?, 1970's Standards, once in a while on a fancy top Studio or Standard and some of the epi's with Custom Top? It varies a lot from guitar to guitar

SG, 335, an most of the rest of the LP's take short shaft Pots...

[needlespauls]

EVERYONE!!! I was literally getting ready to put my LP up for sale over the last couple of weeks. I had a couple of conversations with Jonesy (great great guy), and ordered this set of caps and his treble bleed kits. I got my guitar completely set-up, and had these two mods done, and I can't even believe it!!! My guitar is so much more clear sounding than it was before, and vastly more usable throughout all ranges. The guys at the shop really loved my guitar after the setup and mods were done.
You guys need these!!!!

[jonesy]

Originally Posted by needlespauls

EVERYONE!!! I was literally getting ready to put my LP up for sale over the last couple of weeks. I had a couple of conversations with Jonesy (great great guy), and ordered this set of caps and his treble bleed kits. I got my guitar completely set-up, and had these two mods done, and I can't even believe it!!! My guitar is so much more clear sounding than it was before, and vastly more usable throughout all ranges. The guys at the shop really loved my guitar after the setup and mods were done.
You guys need these!!!!

Wow, where do I mail that endorsement check to
Glad you had such excellent results Bro...

[dogbone94]

holy smack down batman, i need some of these.....

some for double humbuckers and some for a p90/humbucker.....

[dogbone94]

Originally Posted by dogbone94

holy smack down batman, i need some of these.....

some for double humbuckers and some for a p90/humbucker.....

hh is taken care of... thanks to you... now i need the p90/hummer... vintage style..... lollar p90 and a wolfetone fenris thats around 14k.....

[jonesy]

Originally Posted by wantsa58

Thats cool, i'll check back often then.

On a side not i thought that all Gibsons required the use of long shaft pots? Is it just the Customs?

If Dog Bone cant use them, just shoot me a PM.

Hey Bro Dog-bone measured his LP and short shafts are gong to work for him so he is getting that 1 Meg LP rig Pictured in this thread. Just confirmed it on the phone with me
If you see another one of my harnesses listed later, I still might be up for a trade(pedal) plus some cash etc. depending on what it is.
Have a great weekend, Thanks jonesy

[dogbone94]

[jonesy]

GONE, GONE, GONE, DOGBONE94 IS GETTING IT



I WILL BE LISTING MORE HARNESSES IN THE FUTURE, BUT THAT IS ALL FOR NOW...HEY DOGBONE... I WILL BE IN TOUCH WITH YOU ABOUT THE MASTER VOLUME MASTER/TONE RIG WE WERE TALKING ABOUT ON THE PHONE

THANKS, JONESY

[jonesy]

I have had Dealer Pricing on Gibson Parts, Pickups and Celestion Speakers for over 3 years now and order what I need for guitars that I am working on etc. I do not sell Gibson or Celestion on ebay.
But, I am now offering Great Deals to MLPF Members on Gibson Burstbuckers, BB BC, GH, CH, NK covers, 490 498 500 series BB BC, open coils CH NK, P-90's, Covers, trim rings other Gibson Parts and Strings.
Also available to MLPF Members is the Full Line of Celestion Speakers. JBL, Jensen and Fender Speakers are also Available. I Do Not Stock anything, so these are all Special Orders. I order from one of the biggest warehouses in the Mid-west and most of the time have parts in 1-2 days.
Please don't expect me to sell at 10% over cost, but I am fairly competitive with Musicians Friend on most things, Nuff Said. Please Contact me if you would like a price quote on something or for more information?

Peace, jonesy