View Single Post
Old 06-29-2009, 02:25 PM   #1 (permalink)
Iceman0124
Senior Member
 
Iceman0124's Avatar
 
Join Date: Jun 2007
Location: Chattanooga TN
Posts: 1,533
Thanks: 39
Thanked 12 Times in 4 Posts
Warning for squire classic vibe strat guard changes

Found a slight but easily dealt with issue regarding the classic vibe single coils, after I changed the guards I was getting intemitent "popping" sounds, similar to moving the switch, it happend mostly when picking fast single notes around the middle of the neck or higher, it was driving me nuts.....Different amps, different cables.....I dont how many times I opend it up to check connections i just couldnt make it go away, I finally dicovered it was from my hand bouncing on and off the bridge pup screw, eveytime I'd touch it it would make a static sound, I did notice on the original guards they went to a lot more shielding effort than most guitars in that price range and even higher, replicating the shielding solves the issue completely, most important is the joint where the control shileding meets the pup shielding, as indicated in the red circle,

stock guard,



Depending on technique one may never notice, but if yuor hand touches any of the pup scews, it'll make noise....and likely drive you nuts depending how often it occurs. A temp solution was simply taping a length of solder on the screw head and anchored it to the bridge, problem gone. I've never had this problem on any other strat and I've had a few...The pups sound great, but apparently something with them requires the extra shileding,

Hope this helps some folks
Iceman0124 is offline   Reply With Quote
The Following 2 Users Say Thank You to Iceman0124 For This Useful Post: