i want to wire my lp back to a lp but ill keep the killswitch
anyway is a kit like this hard to assemble? and is it any good?
here is some info about it
What's in the kit:
(2) 500K RS Short-Shaft SuperPots™- We designed these pots in conjunction with CTS. Used for the volume controls in the kit, these pots have a custom taper that gives you a noticeable difference between each number on your volume control. You can finally roll your volume down to 2 or 1 and not loose any clarity, even in the neck position. A smoother resistor path make this the best pot to ever be used in the guitar.
(2) 500K CTS Short-Shaft Audio taper pots
(1) RS .022 GuitarCap®- The guitar cap is the first and only capacitor designed specifically for the guitar. This part is the only capacitor in the world that meets our stringent quality-control standards, not only because of its construction, but because of how great it sounds in the tone circuit!! The .022 microfarad GuitarCap® is best for the bridge position tone control of your guitar.
(1) RS .015 GuitarCap®- This is the same great GuitarCap® as above, just in .015 microfarad. This is best used for the neck tone control.
(1) Length vintage-black wire- Used for the grounding in the circuit.
(1) 4-foot length braided wire- Used for wiring switch.
(1) Long 3-way toggle switch- Manufactured by Switchcraft.
(1) Input Jack- Manufactured by Switchcraft.