Quote:
Originally Posted by Drudeboy
If you want it stock, just replaced like for like, if you want 50's, swap the cap connections as clearly shown in the very first post in this thread, it's that simple.
Reagarding the ground with stock pu's the shielding will be suffice though if you change pu's this may change afaik. There is a school of thought that prefers non-grounded strings.
|
My major question is the wiring is vastly different for the stock "modern" wiring vs. how the Modern Kit is wired from RS. I was just curious as to how I should go about wiring the guitar and if there were any major differences between the two.
I may or may not replace the bridge pickup with a Duncan JB in the future, but haven't decided yet. New pots and such are first. I don't really see a need to ground the strings since there is no noise issue.