My Les Paul Forums - View Single Post

ilevene · 10-27-2007, 12:56 PM

I have a 3-pickup 1972 Les Paul Custom. I want to rewire it as follows:

-3 seperate volumes and 1 master tone.
-Pickup selection=Bridge, Neck, Bridge+Neck (just like the standard 2PU model). The middle pickup is used with any of the above combinations by dialing in volume.

This seems pretty simple, I've seen a couple of diagrams. I want to do this using the standard 3 position switchcraft switch. This switch has 5 lugs; 3 on one side, 2 on the other. I'm going to use CTS 500K pots and one .022 cap.

Can someone either post a wiring diagram that shows the lugs, or send it to me at ilevene@pacbell.net?

Thanks!

10-27-2007, 12:56 PM	#19 (permalink)
ilevene Junior Member Join Date: Oct 2007 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Wiring Library I have a 3-pickup 1972 Les Paul Custom. I want to rewire it as follows: -3 seperate volumes and 1 master tone. -Pickup selection=Bridge, Neck, Bridge+Neck (just like the standard 2PU model). The middle pickup is used with any of the above combinations by dialing in volume. This seems pretty simple, I've seen a couple of diagrams. I want to do this using the standard 3 position switchcraft switch. This switch has 5 lugs; 3 on one side, 2 on the other. I'm going to use CTS 500K pots and one .022 cap. Can someone either post a wiring diagram that shows the lugs, or send it to me at ilevene@pacbell.net? Thanks!