|
Re: Wiring Problems, need advice!
Quote:
Originally Posted by TeleDog
it could be a messed up pot, a broken pot leg, a cold solder joint, could be a broken wire, it could be the switch, it could be the leads coming from the pickup, it could be a bad ground...
When rewiring, unless you're 100% positive about the harness, do it step by step specially if you are new to this. Replace a pot, test.. replace another, test again.... time consuming but that's a sure way to spot the problem if and when it hits.
|
Sage advice. If you need wiring diagrams, SD's website has them all. Good luck.
__________________
 ______________________________
Steve-M
'52 Martin D-28
'70 Fender Telecaster
'78 Ibanez Pro MDL 2671/S-AV
'02 Epiphone LP Elite Standard VSB
'07 Epiphone LP Elitist Standard + Top FCB
'10 Epiphone LP Trad Pro Ebony
'10 Epiphone LP 57 Gold Top(Upgraded version)
'10 Epiphone LP Standard Plain Top HB
'12 Epiphone LP Tribute Plus 60's FCB
'12 Epiphone LP Ace Budokan
'11 Gibson LP JB Studio
'12 Gibson Traditional LP Plus Iced Tea
A few Amps too.
|