My Les Paul Forums - View Single Post

eddie_bowers · 06-17-2008, 10:56 AM

Yeah. Just adjust it 1mm up or down and see if it makes any difference.
This could be a loading issue too. When in the middle position your putting both volume controls and tone pots in paralell (which cuts the resistance in half). There is a trick you can do with the tone controls so that only the neck tone is on when in the middle position, but I would test unsoldering one of the tone controls to see if that helps before going through the hassle of doing that wiring trick.

-Eddie

06-17-2008, 10:56 AM	#7 (permalink)
eddie_bowers Senior Member Join Date: Oct 2007 Posts: 298 Thanks: 0 Thanked 3 Times in 1 Post	Re: Wiring up the toggle switch???? Yeah. Just adjust it 1mm up or down and see if it makes any difference. This could be a loading issue too. When in the middle position your putting both volume controls and tone pots in paralell (which cuts the resistance in half). There is a trick you can do with the tone controls so that only the neck tone is on when in the middle position, but I would test unsoldering one of the tone controls to see if that helps before going through the hassle of doing that wiring trick. -Eddie