Re: Epiphone replacement parts
you need to take out your tuner and measure the diameter of the hole but if it's kluson type(tunlip plastic tuning peg) it's usually 8mm and the grover is usually 10mm. just pick the tuner you like and check their spec on the page to see if they'll fit. btw, since you are changing out the stock epi tuners go for 16:1 or 18:1 gear ratio tuners, they'll stay in tune better. fyi, the stock epi grover is 14:1 and the stock kluson type is like 12:1
Never argue with an idiot. They just drag you down to their level and beat you with experience.
Member Of The €piphone Empire
Edwards Jimmy Page ELP-112LTS/RE w/ Super Circuit
Epiphone Slash Les Paul Standard Plus Top
Epiphone Zakk Wylde Les Paul Custom